[PATCH v2 1/3] dt-bindings: clock: meson8b: describe the embedded reset controller

Neil Armstrong narmstrong at baylibre.com
Tue Jul 25 00:55:15 PDT 2017



Le 22/07/2017 20:58, Martin Blumenstingl a écrit :
> The Amlogic Meson8/Meson8b/Meson8m2 clock controller provides some reset
> lines. These are used for example to boot the secondary CPU cores.
> 
> This patch describes the reset controller which is embedded into the
> clock controller on these SoCs.
> 
> Signed-off-by: Martin Blumenstingl <martin.blumenstingl at googlemail.com>
> ---
>  Documentation/devicetree/bindings/clock/amlogic,meson8b-clkc.txt | 8 +++++++-
>  1 file changed, 7 insertions(+), 1 deletion(-)
> 
> diff --git a/Documentation/devicetree/bindings/clock/amlogic,meson8b-clkc.txt b/Documentation/devicetree/bindings/clock/amlogic,meson8b-clkc.txt
> index 606da38c0959..e1af4764114d 100644
> --- a/Documentation/devicetree/bindings/clock/amlogic,meson8b-clkc.txt
> +++ b/Documentation/devicetree/bindings/clock/amlogic,meson8b-clkc.txt
> @@ -16,18 +16,24 @@ Required Properties:
>  	   mapped region.
>  
>  - #clock-cells: should be 1.
> +- #reset-cells: should be 1.
>  
>  Each clock is assigned an identifier and client nodes can use this identifier
>  to specify the clock which they consume. All available clocks are defined as
>  preprocessor macros in the dt-bindings/clock/meson8b-clkc.h header and can be
>  used in device tree sources.
> +This is also valid for the reset lines provided by the clock controller: a
> +preprocessor macro for each reset line is defined (in the same header file as
> +the clock identifiers).
> +
>  
>  Example: Clock controller node:
>  
>  	clkc: clock-controller at c1104000 {
> -		#clock-cells = <1>;
>  		compatible = "amlogic,meson8b-clkc";
>  		reg = <0xc1108000 0x4>, <0xc1104000 0x460>;
> +		#clock-cells = <1>;
> +		#reset-cells = <1>;
>  	};
>  
>  
> 

Reviewed-by: Neil Armstrong <narmstrong at baylibre.com>



More information about the linux-amlogic mailing list