[PATCH v2 3/3] pwm: meson: improve pwm calculation precision.

[Jerome Brunet]

On Thu, 2017-07-06 at 23:21 +0200, Thierry Reding wrote:
> On Thu, Jun 08, 2017 at 02:24:16PM +0200, Jerome Brunet wrote:
> > When using input clocks with high rates, such as clk81 (166MHz), the
> > fin_ns = NSEC_PER_SEC / fin_freq can introduce a significant error.
> > 
> > Ex: fin_freq = 166666667, NSEC_PER_SEC = 1000000000
> >     fin_ns = 5,9999999
> > 
> > which is, of course, rounded down to 5. This introduce an error of ~20%
> > on the period requested from the pwm.
> > 
> > This patch use ps instead of ns (and 64bits integer) to perform the
> > calculation. This should give a good enough precision.
> > 
> > Fixes: 211ed630753d ("pwm: Add support for Meson PWM Controller")
> > Signed-off-by: Jerome Brunet <jbrunet at baylibre.com>
> > ---
> >  drivers/pwm/pwm-meson.c | 15 +++++++++------
> >  1 file changed, 9 insertions(+), 6 deletions(-)
> > 
> > diff --git a/drivers/pwm/pwm-meson.c b/drivers/pwm/pwm-meson.c
> > index b911a944744a..4cdc66f7f718 100644
> > --- a/drivers/pwm/pwm-meson.c
> > +++ b/drivers/pwm/pwm-meson.c
> > @@ -163,7 +163,8 @@ static int meson_pwm_calc(struct meson_pwm *meson,
> >  			  unsigned int duty, unsigned int period)
> >  {
> >  	unsigned int pre_div, cnt, duty_cnt;
> > -	unsigned long fin_freq = -1, fin_ns;
> > +	unsigned long fin_freq = -1;
> > +	u64 fin_ps;
> >  
> >  	if (~(meson->inverter_mask >> id) & 0x1)
> >  		duty = period - duty;
> > @@ -179,13 +180,14 @@ static int meson_pwm_calc(struct meson_pwm *meson,
> >  	}
> >  
> >  	dev_dbg(meson->chip.dev, "fin_freq: %lu Hz\n", fin_freq);
> > -	fin_ns = NSEC_PER_SEC / fin_freq;
> > +	fin_ps = ((u64)NSEC_PER_SEC * 1000) / fin_freq;
> 
> This failed to build, so I had to change this division to a do_div().

Oh ! Indeed :(
I have mostly tested with arm64 which is fine.
I thought I had tested arm(32) build as well but I just noticed that MESON_PWM
option is disabled in multi_v7_defconfig. 

Thanks for catching and fixing this Thierry !


> 
> Thierry