[PATCH v4 0/9] meson-gx: reset RGMII PHYs and configure TX delay

[Martin Blumenstingl]

On Mon, Jan 23, 2017 at 7:55 PM, Kevin Hilman <khilman at baylibre.com> wrote:
> Martin Blumenstingl <martin.blumenstingl at googlemail.com> writes:
>
>> This series adds the reset GPIOs for the (external) ethernet PHYs on all
>> GXBB boards.
>> Additionally it provides a ethernet PHY node which can be used to specify
>> PHY-specific properties (this may be required if more boards require the
>> "eee-broken-1000t" for the RTL8211F ethernet PHY). To make all board .dts
>> consistent I chose to add the PHY node also for boards which don't have a
>> RTL8211F PHY.
>>
>> Patch #7 from this series also removes ethernet support for the P200
>
> I think you mean P201 here, right?
indeed, that's a left-over of my P200 / P201 mixup in v2 - please ignore this :(
I should have dropped that sentence completely since it's a lie in v3
(v3 states in changes since v2: "instead of dropping ethernet support
for P201 we simply re-configure it to RMII mode")