[RFC/RFT PATCH 4/4] drm/bridge: dw-hdmi: Take input format from plat_data
Neil Armstrong
narmstrong at baylibre.com
Tue Jan 17 04:31:34 PST 2017
Some display pipelines can only provide non-RBG input pixels to the HDMI TX
Controller, this patch takes the pixel format from the plat_data if provided.
Signed-off-by: Neil Armstrong <narmstrong at baylibre.com>
---
drivers/gpu/drm/bridge/dw-hdmi.c | 7 +++++--
include/drm/bridge/dw_hdmi.h | 9 +++++++++
2 files changed, 14 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/bridge/dw-hdmi.c b/drivers/gpu/drm/bridge/dw-hdmi.c
index 8a6a183..fa4147c 100644
--- a/drivers/gpu/drm/bridge/dw-hdmi.c
+++ b/drivers/gpu/drm/bridge/dw-hdmi.c
@@ -1420,8 +1420,11 @@ static int dw_hdmi_setup(struct dw_hdmi *hdmi, struct drm_display_mode *mode)
hdmi->hdmi_data.video_mode.mpixelrepetitionoutput = 0;
hdmi->hdmi_data.video_mode.mpixelrepetitioninput = 0;
- /* TODO: Get input format from IPU (via FB driver interface) */
- hdmi->hdmi_data.enc_in_format = RGB;
+ /* Get input format from plat data or fallback to RGB */
+ if (hdmi->plat_data->input_fmt >= 0)
+ hdmi->hdmi_data.enc_in_format = hdmi->plat_data->input_fmt;
+ else
+ hdmi->hdmi_data.enc_in_format = RGB;
hdmi->hdmi_data.enc_out_format = RGB;
diff --git a/include/drm/bridge/dw_hdmi.h b/include/drm/bridge/dw_hdmi.h
index d6a0ab3..4f426c3 100644
--- a/include/drm/bridge/dw_hdmi.h
+++ b/include/drm/bridge/dw_hdmi.h
@@ -21,6 +21,14 @@ enum {
DW_HDMI_RES_MAX,
};
+enum {
+ DW_HDMI_INPUT_FMT_RGB = 0,
+ DW_HDMI_INPUT_FMT_YCBCR444,
+ DW_HDMI_INPUT_FMT_YCBCR422_16BITS,
+ DW_HDMI_INPUT_FMT_YCBCR422_8BITS,
+ DW_HDMI_INPUT_FMT_XVYCC444,
+};
+
enum dw_hdmi_phy_type {
DW_HDMI_PHY_DWC_HDMI_TX_PHY = 0x00,
DW_HDMI_PHY_DWC_MHL_PHY_HEAC = 0xb2,
@@ -68,6 +76,7 @@ struct dw_hdmi_plat_data {
const struct dw_hdmi_plat_data *data);
bool (*hdmi_read_hpd)(struct dw_hdmi *hdmi,
const struct dw_hdmi_plat_data *data);
+ int input_fmt;
};
int dw_hdmi_probe(struct platform_device *pdev,
--
1.9.1
More information about the linux-amlogic
mailing list