[PATCH v2 2/4] clk: gxbb: add the SAR ADC clocks and expose them
Martin Blumenstingl
martin.blumenstingl at googlemail.com
Sun Jan 15 14:42:19 PST 2017
The HHI_SAR_CLK_CNTL contains three SAR ADC specific clocks:
- a mux clock to choose between different ADC reference clocks (this is
2-bit wide, but the datasheet only lists the parents for the first
bit)
- a divider for the input/reference clock
- a gate which enables the ADC clock
Additionally this exposes the ADC core clock (CLKID_SAR_ADC) and
CLKID_SANA (which seems to enable the analog inputs, but unfortunately
there is no documentation for this - we just mimic what the vendor
driver does).
Signed-off-by: Martin Blumenstingl <martin.blumenstingl at googlemail.com>
---
drivers/clk/meson/gxbb.c | 48 +++++++++++++++++++++++++++++++++++
drivers/clk/meson/gxbb.h | 9 ++++---
include/dt-bindings/clock/gxbb-clkc.h | 4 +++
3 files changed, 58 insertions(+), 3 deletions(-)
diff --git a/drivers/clk/meson/gxbb.c b/drivers/clk/meson/gxbb.c
index 9d9af446bafc..1c1ec137a3cc 100644
--- a/drivers/clk/meson/gxbb.c
+++ b/drivers/clk/meson/gxbb.c
@@ -564,6 +564,46 @@ static struct clk_gate gxbb_clk81 = {
},
};
+static struct clk_mux gxbb_sar_adc_clk_sel = {
+ .reg = (void *)HHI_SAR_CLK_CNTL,
+ .mask = 0x3,
+ .shift = 9,
+ .lock = &clk_lock,
+ .hw.init = &(struct clk_init_data){
+ .name = "sar_adc_clk_sel",
+ .ops = &clk_mux_ops,
+ /* NOTE: The datasheet doesn't list the parents for bit 10 */
+ .parent_names = (const char *[]){ "xtal", "clk81", },
+ .num_parents = 2,
+ },
+};
+
+static struct clk_divider gxbb_sar_adc_clk_div = {
+ .reg = (void *)HHI_SAR_CLK_CNTL,
+ .shift = 0,
+ .width = 8,
+ .lock = &clk_lock,
+ .hw.init = &(struct clk_init_data){
+ .name = "sar_adc_clk_div",
+ .ops = &clk_divider_ops,
+ .parent_names = (const char *[]){ "sar_adc_clk_sel" },
+ .num_parents = 1,
+ },
+};
+
+static struct clk_gate gxbb_sar_adc_clk = {
+ .reg = (void *)HHI_SAR_CLK_CNTL,
+ .bit_idx = 8,
+ .lock = &clk_lock,
+ .hw.init = &(struct clk_init_data){
+ .name = "sar_adc_clk",
+ .ops = &clk_gate_ops,
+ .parent_names = (const char *[]){ "sar_adc_clk_div" },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
/* Everything Else (EE) domain gates */
static MESON_GATE(gxbb_ddr, HHI_GCLK_MPEG0, 0);
static MESON_GATE(gxbb_dos, HHI_GCLK_MPEG0, 1);
@@ -754,6 +794,9 @@ static struct clk_hw_onecell_data gxbb_hw_onecell_data = {
[CLKID_SD_EMMC_A] = &gxbb_emmc_a.hw,
[CLKID_SD_EMMC_B] = &gxbb_emmc_b.hw,
[CLKID_SD_EMMC_C] = &gxbb_emmc_c.hw,
+ [CLKID_SAR_ADC_CLK] = &gxbb_sar_adc_clk.hw,
+ [CLKID_SAR_ADC_SEL] = &gxbb_sar_adc_clk_sel.hw,
+ [CLKID_SAR_ADC_DIV] = &gxbb_sar_adc_clk_div.hw,
},
.num = NR_CLKS,
};
@@ -856,6 +899,7 @@ static struct clk_gate *gxbb_clk_gates[] = {
&gxbb_emmc_a,
&gxbb_emmc_b,
&gxbb_emmc_c,
+ &gxbb_sar_adc_clk,
};
static int gxbb_clkc_probe(struct platform_device *pdev)
@@ -888,6 +932,10 @@ static int gxbb_clkc_probe(struct platform_device *pdev)
gxbb_mpeg_clk_sel.reg = clk_base + (u64)gxbb_mpeg_clk_sel.reg;
gxbb_mpeg_clk_div.reg = clk_base + (u64)gxbb_mpeg_clk_div.reg;
+ /* Populate the base address for the SAR ADC clks */
+ gxbb_sar_adc_clk_sel.reg = clk_base + (u64)gxbb_sar_adc_clk_sel.reg;
+ gxbb_sar_adc_clk_div.reg = clk_base + (u64)gxbb_sar_adc_clk_div.reg;
+
/* Populate base address for gates */
for (i = 0; i < ARRAY_SIZE(gxbb_clk_gates); i++)
gxbb_clk_gates[i]->reg = clk_base +
diff --git a/drivers/clk/meson/gxbb.h b/drivers/clk/meson/gxbb.h
index 0252939ba58f..d90052d74abd 100644
--- a/drivers/clk/meson/gxbb.h
+++ b/drivers/clk/meson/gxbb.h
@@ -191,7 +191,7 @@
#define CLKID_PERIPHS 20
#define CLKID_SPICC 21
/* CLKID_I2C */
-#define CLKID_SAR_ADC 23
+/* #define CLKID_SAR_ADC */
#define CLKID_SMART_CARD 24
#define CLKID_RNG0 25
#define CLKID_UART0 26
@@ -237,7 +237,7 @@
#define CLKID_MMC_PCLK 66
#define CLKID_DVIN 67
#define CLKID_UART2 68
-#define CLKID_SANA 69
+/* #define CLKID_SANA */
#define CLKID_VPU_INTR 70
#define CLKID_SEC_AHB_AHB3_BRIDGE 71
#define CLKID_CLK81_A53 72
@@ -265,8 +265,11 @@
/* CLKID_SD_EMMC_A */
/* CLKID_SD_EMMC_B */
/* CLKID_SD_EMMC_C */
+/* CLKID_SAR_ADC_CLK */
+/* CLKID_SAR_ADC_SEL */
+#define CLKID_SAR_ADC_DIV 99
-#define NR_CLKS 97
+#define NR_CLKS 100
/* include the CLKIDs that have been made part of the stable DT binding */
#include <dt-bindings/clock/gxbb-clkc.h>
diff --git a/include/dt-bindings/clock/gxbb-clkc.h b/include/dt-bindings/clock/gxbb-clkc.h
index baade6f429d0..c2e93676010d 100644
--- a/include/dt-bindings/clock/gxbb-clkc.h
+++ b/include/dt-bindings/clock/gxbb-clkc.h
@@ -14,15 +14,19 @@
#define CLKID_MPLL2 15
#define CLKID_SPI 34
#define CLKID_I2C 22
+#define CLKID_SAR_ADC 23
#define CLKID_ETH 36
#define CLKID_USB0 50
#define CLKID_USB1 51
#define CLKID_USB 55
#define CLKID_USB1_DDR_BRIDGE 64
#define CLKID_USB0_DDR_BRIDGE 65
+#define CLKID_SANA 69
#define CLKID_AO_I2C 93
#define CLKID_SD_EMMC_A 94
#define CLKID_SD_EMMC_B 95
#define CLKID_SD_EMMC_C 96
+#define CLKID_SAR_ADC_CLK 97
+#define CLKID_SAR_ADC_SEL 98
#endif /* __GXBB_CLKC_H */
--
2.11.0
More information about the linux-amlogic
mailing list