[PATCH 1/2] pinctrl: meson: fix uart_ao_b for GXBB and GXL/GXM

Martin Blumenstingl martin.blumenstingl at googlemail.com
Sun Jan 15 14:20:28 PST 2017


The GXBB and GXL/GXM pinctrl drivers had a configuration which conflicts
with uart_ao_a. According to the GXBB ("S905") datasheet the AO UART
functions are:
- GPIOAO_0: Func1 = UART_TX_AO_A (bit 12), Func2 = UART_TX_AO_B (bit 26)
- GPIOAO_1: Func1 = UART_RX_AO_A (bit 11), Func2 = UART_RX_AO_B (bit 25)
- GPIOAO_4: Func2 = UART_TX_AO_B (bit 24)
- GPIOAO_5: Func2 = UART_RX_AO_B (bit 25)

The existing definition for uart_AO_A already uses GPIOAO_0 and GPIOAO_1.
The old definition of uart_AO_B however was broken, as it used GPIOAO_0
for TX (which would be fine) and two pins (GPIOAO_1 and GPIOAO_5) for RX
(which does not make any sense).

This fixes the uart_AO_B configuration by moving it to GPIOAO_4 and
GPIOAO_5 (it would be possible to use GPIOAO_0 and GPIOAO_1 in theory,
but all existing hardware uses uart_AO_A there).
The fix for GXBB and GXL/GXM is identical since it seems that these
specific pins are identical on both SoC variants.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl at googlemail.com>
---
 drivers/pinctrl/meson/pinctrl-meson-gxbb.c | 7 +++----
 drivers/pinctrl/meson/pinctrl-meson-gxl.c  | 7 +++----
 2 files changed, 6 insertions(+), 8 deletions(-)

diff --git a/drivers/pinctrl/meson/pinctrl-meson-gxbb.c b/drivers/pinctrl/meson/pinctrl-meson-gxbb.c
index c3928aa3fefa..e0bca4df2a2f 100644
--- a/drivers/pinctrl/meson/pinctrl-meson-gxbb.c
+++ b/drivers/pinctrl/meson/pinctrl-meson-gxbb.c
@@ -253,9 +253,8 @@ static const unsigned int uart_tx_ao_a_pins[]	= { PIN(GPIOAO_0, 0) };
 static const unsigned int uart_rx_ao_a_pins[]	= { PIN(GPIOAO_1, 0) };
 static const unsigned int uart_cts_ao_a_pins[]	= { PIN(GPIOAO_2, 0) };
 static const unsigned int uart_rts_ao_a_pins[]	= { PIN(GPIOAO_3, 0) };
-static const unsigned int uart_tx_ao_b_pins[]	= { PIN(GPIOAO_0, 0) };
-static const unsigned int uart_rx_ao_b_pins[]	= { PIN(GPIOAO_1, 0),
-						    PIN(GPIOAO_5, 0) };
+static const unsigned int uart_tx_ao_b_pins[]	= { PIN(GPIOAO_4, 0) };
+static const unsigned int uart_rx_ao_b_pins[]	= { PIN(GPIOAO_5, 0) };
 static const unsigned int uart_cts_ao_b_pins[]	= { PIN(GPIOAO_2, 0) };
 static const unsigned int uart_rts_ao_b_pins[]	= { PIN(GPIOAO_3, 0) };
 
@@ -498,7 +497,7 @@ static struct meson_pmx_group meson_gxbb_aobus_groups[] = {
 	GPIO_GROUP(GPIOAO_13, 0),
 
 	/* bank AO */
-	GROUP(uart_tx_ao_b,	0,	26),
+	GROUP(uart_tx_ao_b,	0,	24),
 	GROUP(uart_rx_ao_b,	0,	25),
 	GROUP(uart_tx_ao_a,	0,	12),
 	GROUP(uart_rx_ao_a,	0,	11),
diff --git a/drivers/pinctrl/meson/pinctrl-meson-gxl.c b/drivers/pinctrl/meson/pinctrl-meson-gxl.c
index 25694f7094c7..b69743b07a1d 100644
--- a/drivers/pinctrl/meson/pinctrl-meson-gxl.c
+++ b/drivers/pinctrl/meson/pinctrl-meson-gxl.c
@@ -214,9 +214,8 @@ static const unsigned int uart_tx_ao_a_pins[]	= { PIN(GPIOAO_0, 0) };
 static const unsigned int uart_rx_ao_a_pins[]	= { PIN(GPIOAO_1, 0) };
 static const unsigned int uart_cts_ao_a_pins[]	= { PIN(GPIOAO_2, 0) };
 static const unsigned int uart_rts_ao_a_pins[]	= { PIN(GPIOAO_3, 0) };
-static const unsigned int uart_tx_ao_b_pins[]	= { PIN(GPIOAO_0, 0) };
-static const unsigned int uart_rx_ao_b_pins[]	= { PIN(GPIOAO_1, 0),
-						    PIN(GPIOAO_5, 0) };
+static const unsigned int uart_tx_ao_b_pins[]	= { PIN(GPIOAO_4, 0) };
+static const unsigned int uart_rx_ao_b_pins[]	= { PIN(GPIOAO_5, 0) };
 static const unsigned int uart_cts_ao_b_pins[]	= { PIN(GPIOAO_2, 0) };
 static const unsigned int uart_rts_ao_b_pins[]	= { PIN(GPIOAO_3, 0) };
 
@@ -409,7 +408,7 @@ static struct meson_pmx_group meson_gxl_aobus_groups[] = {
 	GPIO_GROUP(GPIOAO_9, 0),
 
 	/* bank AO */
-	GROUP(uart_tx_ao_b,	0,	26),
+	GROUP(uart_tx_ao_b,	0,	24),
 	GROUP(uart_rx_ao_b,	0,	25),
 	GROUP(uart_tx_ao_a,	0,	12),
 	GROUP(uart_rx_ao_a,	0,	11),
-- 
2.11.0




More information about the linux-amlogic mailing list