[PATCH 1/4] Documentation: dt-bindings: add the Amlogic Meson SAR ADC documentation

[Martin Blumenstingl]

This adds the devicetree binding documentation for the SAR ADC found in
Amlogic Meson SoCs.
Currently only the GXBB, GXL and GXM SoCs are supported.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl at googlemail.com>
---
 .../bindings/iio/adc/amlogic,meson-saradc.txt      | 31 ++++++++++++++++++++++
 1 file changed, 31 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/iio/adc/amlogic,meson-saradc.txt

diff --git a/Documentation/devicetree/bindings/iio/adc/amlogic,meson-saradc.txt b/Documentation/devicetree/bindings/iio/adc/amlogic,meson-saradc.txt
new file mode 100644
index 000000000000..9a0bec7afc63
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/amlogic,meson-saradc.txt
@@ -0,0 +1,31 @@
+* Amlogic Meson SAR (Successive Approximation Register) A/D converter
+
+Required properties:
+- compatible:	depending on the SoC this should be one of:
+			- "amlogic,meson-gxbb-saradc" for GXBB
+			- "amlogic,meson-gxl-saradc" for GXL and GXM
+		along with the generic "amlogic,meson-saradc"
+- reg:		the physical base address and length of the registers
+- clocks:	phandle and clock identifier (see clock-names)
+- clock-names:	mandatory clocks:
+			- "clkin" for the reference clock (typically XTAL)
+			- "core" for the SAR ADC core clock
+		optional clocks:
+			- "sana" for the analog clock
+			- "adc_clk" for the ADC (sampling) clock
+			- "adc_sel" for the ADC (sampling) clock mux
+- vref-supply:	the regulator supply for the ADC reference voltage
+- #io-channel-cells: must be 1, see ../iio-bindings.txt
+
+Example:
+	saradc: adc at 8680 {
+		compatible = "amlogic,meson-gxl-saradc", "amlogic,meson-saradc";
+		#io-channel-cells = <1>;
+		reg = <0x0 0x8680 0x0 0x34>;
+		clocks = <&xtal>,
+			 <&clkc CLKID_SAR_ADC>,
+			 <&clkc CLKID_SANA>,
+			 <&clkc CLKID_SAR_ADC_CLK>,
+			 <&clkc CLKID_SAR_ADC_SEL>;
+		clock-names = "clkin", "core", "sana", "adc_clk", "adc_sel";
+	};
-- 
2.11.0