[PATCH v3 2/2] ARM64: dts: meson-axg: enable ethernet for A113D S400 board

[Yixun Lan]

This is tested in the S400 dev board which use a RTL8211F PHY,
and the pins connect to the 'eth_rgmii_y_pins' group.

Reviewed-by: Neil Armstrong <narmstrong at baylibre.com>
Signed-off-by: Yixun Lan <yixun.lan at amlogic.com>
---
 arch/arm64/boot/dts/amlogic/meson-axg-s400.dts | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts b/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts
index 70eca1f8736a..b8c4f1913d28 100644
--- a/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts
@@ -20,3 +20,10 @@
 &uart_AO {
 	status = "okay";
 };
+
+&ethmac {
+	status = "okay";
+	phy-mode = "rgmii";
+	pinctrl-0 = <&eth_rgmii_y_pins>;
+	pinctrl-names = "default";
+};
-- 
2.15.1