[PATCH 0/3] Meson8 GPIO interrupt support

[Kevin Hilman]

Martin Blumenstingl <martin.blumenstingl at googlemail.com> writes:

> Hi Kevin,
>
> On Tue, Oct 31, 2017 at 11:13 AM, Kevin Hilman <khilman at baylibre.com> wrote:
>> Marc Zyngier <marc.zyngier at arm.com> writes:
>>
>>> On Mon, Oct 30 2017 at 12:05:20 am GMT, Martin Blumenstingl <martin.blumenstingl at googlemail.com> wrote:
>>>> This is a simple follow-up of two series from Jerome:
>>>> - "irqchip: meson: add support for the gpio interrupt controller"
>>>> - "ARM: meson: enable gpio interrupt controller"
>>>>
>>>> This fills in the missing bits to have GPIO interrupt support on Meson8,
>>>> which includes:
>>>> - a new binding in the driver with the correct IRQ number
>>>> - enabling the GPIO interrupt controller in meson8.dts
>>>> - enabling the GPIO interrupt controller via Kconfig for MACH_MESON8
>>>>
>>>>
>>>> Martin Blumenstingl (3):
>>>>   irqchip/meson-gpio: add support for Meson8 SoCs
>>>>   ARM: dts: meson8: enable the GPIO interrupt controller
>>>>   ARM: meson: enable MESON_IRQ_GPIO also for MACH_MESON8
>>>>
>>>>  .../bindings/interrupt-controller/amlogic,meson-gpio-intc.txt        | 1 +
>>>>  arch/arm/boot/dts/meson8.dtsi                                        | 5 +++++
>>>>  arch/arm/mach-meson/Kconfig                                          | 1 +
>>>>  drivers/irqchip/irq-meson-gpio.c                                     | 5 +++++
>>>>  4 files changed, 12 insertions(+)
>>>
>>> Kevin, Carlos: Are you OK with this one? It seems pretty minor, and I'm
>>> happy to queue it if I get an Ack for it. If you'd rather get it through
>>> via armsoc, let me know.
>>
>> Can you take the drivers/irqchip and bindings patch (PATCH 1/3) and I'll
>> take the rest to avoid conflicts with a bunch of other moving parts we
>> have in arch/arm.
> PATCH 1/3 even made it into v4.15
> can you please queue the remaining two patches for v4.16 - or do you
> want me to re-send these?

No need to resend, I've applied them to v4.16/dt.

Thanks for following up.

Kevin