[PATCH net-next v2 2/8] net: phy: meson-gxl: define control registers
Jerome Brunet
jbrunet at baylibre.com
Thu Dec 7 06:27:09 PST 2017
Define registers and bits in meson-gxl PHY driver to make a bit
more human friendly. No functional change.
Signed-off-by: Neil Armstrong <narmstrong at baylibre.com>
Signed-off-by: Jerome Brunet <jbrunet at baylibre.com>
---
drivers/net/phy/meson-gxl.c | 64 ++++++++++++++++++++++++++++++++++++---------
1 file changed, 51 insertions(+), 13 deletions(-)
diff --git a/drivers/net/phy/meson-gxl.c b/drivers/net/phy/meson-gxl.c
index 7ddb709f69fc..d82aa8cea401 100644
--- a/drivers/net/phy/meson-gxl.c
+++ b/drivers/net/phy/meson-gxl.c
@@ -22,54 +22,92 @@
#include <linux/ethtool.h>
#include <linux/phy.h>
#include <linux/netdevice.h>
+#include <linux/bitfield.h>
+
+#define TSTCNTL 20
+#define TSTCNTL_READ BIT(15)
+#define TSTCNTL_WRITE BIT(14)
+#define TSTCNTL_REG_BANK_SEL GENMASK(12, 11)
+#define TSTCNTL_TEST_MODE BIT(10)
+#define TSTCNTL_READ_ADDRESS GENMASK(9, 5)
+#define TSTCNTL_WRITE_ADDRESS GENMASK(4, 0)
+#define TSTREAD1 21
+#define TSTWRITE 23
+
+#define BANK_ANALOG_DSP 0
+#define BANK_BIST 3
+
+/* Analog/DSP Registers */
+#define A6_CONFIG_REG 0x17
+
+/* BIST Registers */
+#define FR_PLL_CONTROL 0x1b
+#define FR_PLL_DIV0 0x1c
+#define FR_PLL_DIV1 0x1d
static int meson_gxl_config_init(struct phy_device *phydev)
{
int ret;
/* Enable Analog and DSP register Bank access by */
- ret = phy_write(phydev, 0x14, 0x0000);
+ ret = phy_write(phydev, TSTCNTL, 0);
if (ret)
return ret;
- ret = phy_write(phydev, 0x14, 0x0400);
+ ret = phy_write(phydev, TSTCNTL, TSTCNTL_TEST_MODE);
if (ret)
return ret;
- ret = phy_write(phydev, 0x14, 0x0000);
+ ret = phy_write(phydev, TSTCNTL, 0);
if (ret)
return ret;
- ret = phy_write(phydev, 0x14, 0x0400);
+ ret = phy_write(phydev, TSTCNTL, TSTCNTL_TEST_MODE);
if (ret)
return ret;
- /* Write Analog register 23 */
- ret = phy_write(phydev, 0x17, 0x8E0D);
+ /* Write CONFIG_A6*/
+ ret = phy_write(phydev, TSTWRITE, 0x8e0d)
if (ret)
return ret;
- ret = phy_write(phydev, 0x14, 0x4417);
+ ret = phy_write(phydev, TSTCNTL,
+ TSTCNTL_WRITE
+ | FIELD_PREP(TSTCNTL_REG_BANK_SEL, BANK_ANALOG_DSP)
+ | TSTCNTL_TEST_MODE
+ | FIELD_PREP(TSTCNTL_WRITE_ADDRESS, A6_CONFIG_REG));
if (ret)
return ret;
/* Enable fractional PLL */
- ret = phy_write(phydev, 0x17, 0x0005);
+ ret = phy_write(phydev, TSTWRITE, 0x0005);
if (ret)
return ret;
- ret = phy_write(phydev, 0x14, 0x5C1B);
+ ret = phy_write(phydev, TSTCNTL,
+ TSTCNTL_WRITE
+ | FIELD_PREP(TSTCNTL_REG_BANK_SEL, BANK_BIST)
+ | TSTCNTL_TEST_MODE
+ | FIELD_PREP(TSTCNTL_WRITE_ADDRESS, FR_PLL_CONTROL));
if (ret)
return ret;
/* Program fraction FR_PLL_DIV1 */
- ret = phy_write(phydev, 0x17, 0x029A);
+ ret = phy_write(phydev, TSTWRITE, 0x029a);
if (ret)
return ret;
- ret = phy_write(phydev, 0x14, 0x5C1D);
+ ret = phy_write(phydev, TSTCNTL,
+ TSTCNTL_WRITE
+ | FIELD_PREP(TSTCNTL_REG_BANK_SEL, BANK_BIST)
+ | TSTCNTL_TEST_MODE
+ | FIELD_PREP(TSTCNTL_WRITE_ADDRESS, FR_PLL_DIV1));
if (ret)
return ret;
/* Program fraction FR_PLL_DIV1 */
- ret = phy_write(phydev, 0x17, 0xAAAA);
+ ret = phy_write(phydev, TSTWRITE, 0xaaaa);
if (ret)
return ret;
- ret = phy_write(phydev, 0x14, 0x5C1C);
+ ret = phy_write(phydev, TSTCNTL,
+ TSTCNTL_WRITE
+ | FIELD_PREP(TSTCNTL_REG_BANK_SEL, BANK_BIST)
+ | TSTCNTL_TEST_MODE
+ | FIELD_PREP(TSTCNTL_WRITE_ADDRESS, FR_PLL_DIV0));
if (ret)
return ret;
--
2.14.3
More information about the linux-amlogic
mailing list