[RESEND PATCH 4/4] drm/meson: Add missing VPU init

Chris Wilson chris at chris-wilson.co.uk
Wed Dec 6 04:09:42 PST 2017


Quoting Neil Armstrong (2017-12-06 12:03:59)
> On 06/12/2017 13:02, Chris Wilson wrote:
> > Quoting Neil Armstrong (2017-12-06 11:54:28)
> >> The VPU init misses these configurations values.
> >>
> >> Signed-off-by: Neil Armstrong <narmstrong at baylibre.com>
> >> ---
> >>  drivers/gpu/drm/meson/meson_drv.c       | 9 +++++++++
> >>  drivers/gpu/drm/meson/meson_registers.h | 4 ++++
> >>  2 files changed, 13 insertions(+)
> >>
> >> diff --git a/drivers/gpu/drm/meson/meson_drv.c b/drivers/gpu/drm/meson/meson_drv.c
> >> index 3b804fd..f9ad0e9 100644
> >> --- a/drivers/gpu/drm/meson/meson_drv.c
> >> +++ b/drivers/gpu/drm/meson/meson_drv.c
> >> @@ -151,6 +151,14 @@ static struct regmap_config meson_regmap_config = {
> >>         .max_register   = 0x1000,
> >>  };
> >>  
> >> +static void meson_vpu_init(struct meson_drm *priv)
> >> +{
> >> +       writel_relaxed(0x210000, priv->io_base + _REG(VPU_RDARB_MODE_L1C1));
> >> +       writel_relaxed(0x10000, priv->io_base + _REG(VPU_RDARB_MODE_L1C2));
> >> +       writel_relaxed(0x900000, priv->io_base + _REG(VPU_RDARB_MODE_L2C1));
> >> +       writel_relaxed(0x20000, priv->io_base + _REG(VPU_WRARB_MODE_L2C1));
> >> +}
> > 
> >> diff --git a/drivers/gpu/drm/meson/meson_registers.h b/drivers/gpu/drm/meson/meson_registers.h
> >> index 2847381..bca8714 100644
> >> --- a/drivers/gpu/drm/meson/meson_registers.h
> >> +++ b/drivers/gpu/drm/meson/meson_registers.h
> >> @@ -1363,6 +1363,10 @@
> >>  #define VPU_PROT3_STAT_1 0x277a
> >>  #define VPU_PROT3_STAT_2 0x277b
> >>  #define VPU_PROT3_REQ_ONOFF 0x277c
> >> +#define VPU_RDARB_MODE_L1C1 0x2790
> >> +#define VPU_RDARB_MODE_L1C2 0x2799
> > 
> > Hmm, not naturally aligned for writel. Is the register width correct,
> > address correct, or this really is an unaligned iowrite?
> 
> The registers are aligned with the documentation, then are used with the _REG() macro
> to align them with the bus (on top of the file).

Oh, that surprised me.
Acked-by: Chris Wilson <chris at chris-wilson.co.uk>
-Chris



More information about the linux-amlogic mailing list