[PATCH net-next] net: phy: meson-gxl: cleanup by defining the control registers

[Jerome Brunet]

From: Neil Armstrong <narmstrong at baylibre.com>

Define registers and bits in meson-gxl PHY driver to make a bit
more human friendly. No functional change

Signed-off-by: Neil Armstrong <narmstrong at baylibre.com>
Signed-off-by: Jerome Brunet <jbrunet at baylibre.com>
---
 drivers/net/phy/meson-gxl.c | 111 +++++++++++++++++++++++++++++++++++++-------
 1 file changed, 93 insertions(+), 18 deletions(-)

diff --git a/drivers/net/phy/meson-gxl.c b/drivers/net/phy/meson-gxl.c
index 1ea69b7585d9..82c11556605e 100644
--- a/drivers/net/phy/meson-gxl.c
+++ b/drivers/net/phy/meson-gxl.c
@@ -22,32 +22,107 @@
 #include <linux/ethtool.h>
 #include <linux/phy.h>
 #include <linux/netdevice.h>
+#include <linux/bitfield.h>
+
+#define TSTCNTL		0x14
+#define TSTREAD1	0x15
+#define TSTREAD2	0x16
+#define TSTWRITE	0x17
+
+#define TSTCNTL_READ		BIT(15)
+#define TSTCNTL_WRITE		BIT(14)
+#define TSTCNTL_REG_BANK_SEL	GENMASK(12, 11)
+#define TSTCNTL_TEST_MODE	BIT(10)
+#define TSTCNTL_READ_ADDRESS	GENMASK(9, 5)
+#define TSTCNTL_WRITE_ADDRESS	GENMASK(4, 0)
+
+#define BANK_ANALOG_DSP		0
+#define BANK_BIST		3
+
+/* Analog/DSP Registers */
+#define A6_CONFIG_REG		0x17
+
+/* BIST Registers */
+#define FR_PLL_CONTROL		0x1b
+#define FR_PLL_DIV0		0x1c
+#define FR_PLL_DIV1		0x1d
+
+#define A6_CONFIG_PLLMULX4ICH		BIT(15)
+#define A6_CONFIG_PLLBIASSEL		BIT(14)
+#define A6_CONFIG_PLLINTRATIO		GENMASK(13, 12)
+#define A6_CONFIG_PLLBUFITRIM		GENMASK(11, 9)
+#define A6_CONFIG_PLLCHTRIM		GENMASK(8, 5)
+#define A6_CONFIG_PLLCHBIASSEL		BIT(4)
+#define A6_CONFIG_PLLRSTVCOPD		BIT(3)
+#define A6_CONFIG_PLLCPOFF		BIT(2)
+#define A6_CONFIG_PLLPD			BIT(1)
+#define A6_CONFIG_PLL_SRC		BIT(0)
+
+static inline int meson_gxl_write_reg(struct phy_device *phydev,
+				      unsigned int bank, unsigned int reg,
+				      uint16_t value)
+{
+	int ret;
+
+	/* Enable Analog and DSP register Bank access by
+	 * toggling TSTCNTL_TEST_MODE bit in the TSTCNTL register
+	 */
+	ret = phy_write(phydev, TSTCNTL, 0);
+	if (ret)
+		goto out;
+	ret = phy_write(phydev, TSTCNTL, TSTCNTL_TEST_MODE);
+	if (ret)
+		goto out;
+	ret = phy_write(phydev, TSTCNTL, 0);
+	if (ret)
+		goto out;
+	ret = phy_write(phydev, TSTCNTL, TSTCNTL_TEST_MODE);
+	if (ret)
+		goto out;
+
+	ret = phy_write(phydev, TSTWRITE, value);
+	if (ret)
+		goto out;
+
+	ret = phy_write(phydev, TSTCNTL, TSTCNTL_WRITE |
+			FIELD_PREP(TSTCNTL_REG_BANK_SEL, bank) |
+			TSTCNTL_TEST_MODE |
+			FIELD_PREP(TSTCNTL_WRITE_ADDRESS, reg));
+
+out:
+	/* Close the bank access on our way out */
+	phy_write(phydev, TSTCNTL, 0);
+	return ret;
+}
+
 
 static int meson_gxl_config_init(struct phy_device *phydev)
 {
-	/* Enable Analog and DSP register Bank access by */
-	phy_write(phydev, 0x14, 0x0000);
-	phy_write(phydev, 0x14, 0x0400);
-	phy_write(phydev, 0x14, 0x0000);
-	phy_write(phydev, 0x14, 0x0400);
+	int ret;
 
-	/* Write Analog register 23 */
-	phy_write(phydev, 0x17, 0x8E0D);
-	phy_write(phydev, 0x14, 0x4417);
+	/* Write PLL Configuration 1 */
+	ret = meson_gxl_write_reg(phydev, BANK_ANALOG_DSP, A6_CONFIG_REG,
+				  A6_CONFIG_PLLMULX4ICH |
+				  FIELD_PREP(A6_CONFIG_PLLBUFITRIM, 7) |
+				  A6_CONFIG_PLLRSTVCOPD |
+				  A6_CONFIG_PLLCPOFF |
+				  A6_CONFIG_PLL_SRC);
+	if (ret)
+		return ret;
 
-	/* Enable fractional PLL */
-	phy_write(phydev, 0x17, 0x0005);
-	phy_write(phydev, 0x14, 0x5C1B);
+	/* Enable fractional PLL configuration */
+	ret = meson_gxl_write_reg(phydev, BANK_BIST, FR_PLL_CONTROL, 0x5);
+	if (ret)
+		return ret;
 
-	/* Program fraction FR_PLL_DIV1 */
-	phy_write(phydev, 0x17, 0x029A);
-	phy_write(phydev, 0x14, 0x5C1D);
+	ret = meson_gxl_write_reg(phydev, BANK_BIST, FR_PLL_DIV1, 0x029a);
+	if (ret)
+		return ret;
 
-	/* Program fraction FR_PLL_DIV1 */
-	phy_write(phydev, 0x17, 0xAAAA);
-	phy_write(phydev, 0x14, 0x5C1C);
+	/* Program fraction FR_PLL_DIV0 */
+	ret = meson_gxl_write_reg(phydev, BANK_BIST, FR_PLL_DIV0, 0xaaaa);
 
-	return 0;
+	return ret;
 }
 
 static struct phy_driver meson_gxl_phy[] = {
-- 
2.14.3