[PATCH v3 10/13] mmc: meson-gx: use CCF to handle the clock phases
Jerome Brunet
jbrunet at baylibre.com
Mon Aug 28 07:29:12 PDT 2017
Several phases can be controlled on the meson-gx controller, the core, tx
and rx clock phase. The tx and rx uses delays to allow more fine grained
setting of the phase. To properly compute the phase using delays,
accessing the clock rate is necessary.
Instead of ad-hoc functions, use the common clock framework to set the
clock phases (and access the clock rate while doing it).
Acked-by: Kevin Hilman <khilman at baylibre.com>
Signed-off-by: Jerome Brunet <jbrunet at baylibre.com>
---
drivers/mmc/host/meson-gx-mmc.c | 217 ++++++++++++++++++++++++++++++++--------
1 file changed, 176 insertions(+), 41 deletions(-)
diff --git a/drivers/mmc/host/meson-gx-mmc.c b/drivers/mmc/host/meson-gx-mmc.c
index 40fa7ae64c72..2fa18faa7f0f 100644
--- a/drivers/mmc/host/meson-gx-mmc.c
+++ b/drivers/mmc/host/meson-gx-mmc.c
@@ -46,10 +46,9 @@
#define CLK_CORE_PHASE_MASK GENMASK(9, 8)
#define CLK_TX_PHASE_MASK GENMASK(11, 10)
#define CLK_RX_PHASE_MASK GENMASK(13, 12)
-#define CLK_PHASE_0 0
-#define CLK_PHASE_90 1
-#define CLK_PHASE_180 2
-#define CLK_PHASE_270 3
+#define CLK_TX_DELAY_MASK GENMASK(19, 16)
+#define CLK_RX_DELAY_MASK GENMASK(23, 20)
+#define CLK_DELAY_STEP_PS 200
#define CLK_ALWAYS_ON BIT(24)
#define SD_EMMC_DELAY 0x4
@@ -121,9 +120,9 @@
#define MUX_CLK_NUM_PARENTS 2
struct meson_tuning_params {
- u8 core_phase;
- u8 tx_phase;
- u8 rx_phase;
+ unsigned int core_phase;
+ unsigned int tx_phase;
+ unsigned int rx_phase;
};
struct sd_emmc_desc {
@@ -142,6 +141,8 @@ struct meson_host {
void __iomem *regs;
struct clk *core_clk;
struct clk *mmc_clk;
+ struct clk *rx_clk;
+ struct clk *tx_clk;
unsigned long req_rate;
struct pinctrl *pinctrl;
@@ -181,6 +182,90 @@ struct meson_host {
#define CMD_RESP_MASK GENMASK(31, 1)
#define CMD_RESP_SRAM BIT(0)
+struct meson_mmc_phase {
+ struct clk_hw hw;
+ void __iomem *reg;
+ unsigned long phase_mask;
+ unsigned long delay_mask;
+ unsigned int delay_step_ps;
+};
+
+#define to_meson_mmc_phase(_hw) container_of(_hw, struct meson_mmc_phase, hw)
+
+static int meson_mmc_clk_get_phase(struct clk_hw *hw)
+{
+ struct meson_mmc_phase *mmc = to_meson_mmc_phase(hw);
+ unsigned int phase_num = 1 << hweight_long(mmc->phase_mask);
+ unsigned long period_ps, p, d;
+ int degrees;
+ u32 val;
+
+ val = readl(mmc->reg);
+ p = (val & mmc->phase_mask) >> __bf_shf(mmc->phase_mask);
+ degrees = p * 360 / phase_num;
+
+ if (mmc->delay_mask) {
+ period_ps = DIV_ROUND_UP((unsigned long)NSEC_PER_SEC * 1000,
+ clk_get_rate(hw->clk));
+ d = (val & mmc->delay_mask) >> __bf_shf(mmc->delay_mask);
+ degrees += d * mmc->delay_step_ps * 360 / period_ps;
+ degrees %= 360;
+ }
+
+ return degrees;
+}
+
+static void meson_mmc_apply_phase_delay(struct meson_mmc_phase *mmc,
+ unsigned int phase,
+ unsigned int delay)
+{
+ u32 val;
+
+ val = readl(mmc->reg);
+ val &= ~mmc->phase_mask;
+ val |= phase << __bf_shf(mmc->phase_mask);
+
+ if (mmc->delay_mask) {
+ val &= ~mmc->delay_mask;
+ val |= delay << __bf_shf(mmc->delay_mask);
+ }
+
+ writel(val, mmc->reg);
+}
+
+static int meson_mmc_clk_set_phase(struct clk_hw *hw, int degrees)
+{
+ struct meson_mmc_phase *mmc = to_meson_mmc_phase(hw);
+ unsigned int phase_num = 1 << hweight_long(mmc->phase_mask);
+ unsigned long period_ps, d = 0, r;
+ uint64_t p;
+
+ p = degrees % 360;
+
+ if (!mmc->delay_mask) {
+ p = DIV_ROUND_CLOSEST_ULL(p, 360 / phase_num);
+ } else {
+ period_ps = DIV_ROUND_UP((unsigned long)NSEC_PER_SEC * 1000,
+ clk_get_rate(hw->clk));
+
+ /* First compute the phase index (p), the remainder (r) is the
+ * part we'll try to acheive using the delays (d).
+ */
+ r = do_div(p, 360 / phase_num);
+ d = DIV_ROUND_CLOSEST(r * period_ps,
+ 360 * mmc->delay_step_ps);
+ d = min(d, mmc->delay_mask >> __bf_shf(mmc->delay_mask));
+ }
+
+ meson_mmc_apply_phase_delay(mmc, p, d);
+ return 0;
+}
+
+static const struct clk_ops meson_mmc_clk_phase_ops = {
+ .get_phase = meson_mmc_clk_get_phase,
+ .set_phase = meson_mmc_clk_set_phase,
+};
+
static unsigned int meson_mmc_get_timeout_msecs(struct mmc_data *data)
{
unsigned int timeout = data->timeout_ns / NSEC_PER_MSEC;
@@ -373,6 +458,13 @@ static int meson_mmc_clk_set(struct meson_host *host, struct mmc_ios *ios)
return 0;
}
+static void meson_mmc_set_phase_params(struct meson_host *host)
+{
+ clk_set_phase(host->mmc_clk, host->tp.core_phase);
+ clk_set_phase(host->tx_clk, host->tp.tx_phase);
+ clk_set_phase(host->rx_clk, host->tp.rx_phase);
+}
+
/*
* The SD/eMMC IP block has an internal mux and divider used for
* generating the MMC clock. Use the clock framework to create and
@@ -383,6 +475,7 @@ static int meson_mmc_clk_init(struct meson_host *host)
struct clk_init_data init;
struct clk_mux *mux;
struct clk_divider *div;
+ struct meson_mmc_phase *core, *tx, *rx;
struct clk *clk;
char clk_name[32];
int i, ret = 0;
@@ -394,9 +487,6 @@ static int meson_mmc_clk_init(struct meson_host *host)
clk_reg = 0;
clk_reg |= CLK_ALWAYS_ON;
clk_reg |= CLK_DIV_MASK;
- clk_reg |= FIELD_PREP(CLK_CORE_PHASE_MASK, host->tp.core_phase);
- clk_reg |= FIELD_PREP(CLK_TX_PHASE_MASK, host->tp.tx_phase);
- clk_reg |= FIELD_PREP(CLK_RX_PHASE_MASK, host->tp.rx_phase);
writel(clk_reg, host->regs + SD_EMMC_CLOCK);
/* get the mux parents */
@@ -456,10 +546,80 @@ static int meson_mmc_clk_init(struct meson_host *host)
div->flags = (CLK_DIVIDER_ONE_BASED |
CLK_DIVIDER_ROUND_CLOSEST);
- host->mmc_clk = devm_clk_register(host->dev, &div->hw);
+ clk = devm_clk_register(host->dev, &div->hw);
+ if (WARN_ON(IS_ERR(clk)))
+ return PTR_ERR(clk);
+
+ /* create the mmc core clock */
+ core = devm_kzalloc(host->dev, sizeof(*core), GFP_KERNEL);
+ if (!core)
+ return -ENOMEM;
+
+ snprintf(clk_name, sizeof(clk_name), "%s#core", dev_name(host->dev));
+ init.name = clk_name;
+ init.ops = &meson_mmc_clk_phase_ops;
+ init.flags = CLK_SET_RATE_PARENT;
+ clk_parent[0] = __clk_get_name(clk);
+ init.parent_names = clk_parent;
+ init.num_parents = 1;
+
+ core->reg = host->regs + SD_EMMC_CLOCK;
+ core->phase_mask = CLK_CORE_PHASE_MASK;
+ core->hw.init = &init;
+
+ host->mmc_clk = devm_clk_register(host->dev, &core->hw);
if (WARN_ON(PTR_ERR_OR_ZERO(host->mmc_clk)))
return PTR_ERR(host->mmc_clk);
+ /* create the mmc tx clock */
+ tx = devm_kzalloc(host->dev, sizeof(*tx), GFP_KERNEL);
+ if (!tx)
+ return -ENOMEM;
+
+ snprintf(clk_name, sizeof(clk_name), "%s#tx", dev_name(host->dev));
+ init.name = clk_name;
+ init.ops = &meson_mmc_clk_phase_ops;
+ init.flags = 0;
+ clk_parent[0] = __clk_get_name(host->mmc_clk);
+ init.parent_names = clk_parent;
+ init.num_parents = 1;
+
+ tx->reg = host->regs + SD_EMMC_CLOCK;
+ tx->phase_mask = CLK_TX_PHASE_MASK;
+ tx->delay_mask = CLK_TX_DELAY_MASK;
+ tx->delay_step_ps = CLK_DELAY_STEP_PS;
+ tx->hw.init = &init;
+
+ host->tx_clk = devm_clk_register(host->dev, &tx->hw);
+ if (WARN_ON(PTR_ERR_OR_ZERO(host->tx_clk)))
+ return PTR_ERR(host->tx_clk);
+
+ /* create the mmc rx clock */
+ rx = devm_kzalloc(host->dev, sizeof(*rx), GFP_KERNEL);
+ if (!rx)
+ return -ENOMEM;
+
+ snprintf(clk_name, sizeof(clk_name), "%s#rx", dev_name(host->dev));
+ init.name = clk_name;
+ init.ops = &meson_mmc_clk_phase_ops;
+ init.flags = 0;
+ clk_parent[0] = __clk_get_name(host->mmc_clk);
+ init.parent_names = clk_parent;
+ init.num_parents = 1;
+
+ rx->reg = host->regs + SD_EMMC_CLOCK;
+ rx->phase_mask = CLK_RX_PHASE_MASK;
+ rx->delay_mask = CLK_RX_DELAY_MASK;
+ rx->delay_step_ps = CLK_DELAY_STEP_PS;
+ rx->hw.init = &init;
+
+ host->rx_clk = devm_clk_register(host->dev, &rx->hw);
+ if (WARN_ON(PTR_ERR_OR_ZERO(host->rx_clk)))
+ return PTR_ERR(host->rx_clk);
+
+ /* Set the initial phase parameters */
+ meson_mmc_set_phase_params(host);
+
/* init SD_EMMC_CLOCK to sane defaults w/min clock rate */
host->mmc->f_min = clk_round_rate(host->mmc_clk, 400000);
ret = clk_set_rate(host->mmc_clk, host->mmc->f_min);
@@ -469,31 +629,6 @@ static int meson_mmc_clk_init(struct meson_host *host)
return clk_prepare_enable(host->mmc_clk);
}
-static void meson_mmc_set_tuning_params(struct mmc_host *mmc)
-{
- struct meson_host *host = mmc_priv(mmc);
- u32 regval;
-
- /* stop clock */
- regval = readl(host->regs + SD_EMMC_CFG);
- regval |= CFG_STOP_CLOCK;
- writel(regval, host->regs + SD_EMMC_CFG);
-
- regval = readl(host->regs + SD_EMMC_CLOCK);
- regval &= ~CLK_CORE_PHASE_MASK;
- regval |= FIELD_PREP(CLK_CORE_PHASE_MASK, host->tp.core_phase);
- regval &= ~CLK_TX_PHASE_MASK;
- regval |= FIELD_PREP(CLK_TX_PHASE_MASK, host->tp.tx_phase);
- regval &= ~CLK_RX_PHASE_MASK;
- regval |= FIELD_PREP(CLK_RX_PHASE_MASK, host->tp.rx_phase);
- writel(regval, host->regs + SD_EMMC_CLOCK);
-
- /* start clock */
- regval = readl(host->regs + SD_EMMC_CFG);
- regval &= ~CFG_STOP_CLOCK;
- writel(regval, host->regs + SD_EMMC_CFG);
-}
-
static void meson_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
{
struct meson_host *host = mmc_priv(mmc);
@@ -862,13 +997,13 @@ static int meson_mmc_execute_tuning(struct mmc_host *mmc, u32 opcode)
dev_info(mmc_dev(mmc), "(re)tuning...\n");
- for (i = CLK_PHASE_0; i <= CLK_PHASE_270; i++) {
+ for (i = 0; i < 360; i += 90) {
host->tp.rx_phase = i;
/* exclude the active parameter set if retuning */
if (!memcmp(&tp_old, &host->tp, sizeof(tp_old)) &&
mmc->doing_retune)
continue;
- meson_mmc_set_tuning_params(mmc);
+ meson_mmc_set_phase_params(host);
ret = mmc_send_tuning(mmc, opcode, &cmd_error);
if (!ret)
break;
@@ -999,9 +1134,9 @@ static int meson_mmc_probe(struct platform_device *pdev)
if (ret)
goto free_host;
- host->tp.core_phase = CLK_PHASE_180;
- host->tp.tx_phase = CLK_PHASE_0;
- host->tp.rx_phase = CLK_PHASE_0;
+ host->tp.core_phase = 180;
+ host->tp.tx_phase = 0;
+ host->tp.rx_phase = 0;
ret = meson_mmc_clk_init(host);
if (ret)
--
2.9.5
More information about the linux-amlogic
mailing list