[PATCH v2 11/16] mmc: meson-gx: simplify interrupt handler
Jerome Brunet
jbrunet at baylibre.com
Mon Aug 21 09:02:56 PDT 2017
No functional change, just improve interrupt handler readability
Reviewed-by: Kevin Hilman <khilman at baylibre.com>
Signed-off-by: Jerome Brunet <jbrunet at baylibre.com>
---
drivers/mmc/host/meson-gx-mmc.c | 93 +++++++++++++++++------------------------
1 file changed, 39 insertions(+), 54 deletions(-)
diff --git a/drivers/mmc/host/meson-gx-mmc.c b/drivers/mmc/host/meson-gx-mmc.c
index c37e31dc709e..5203a9f76fe3 100644
--- a/drivers/mmc/host/meson-gx-mmc.c
+++ b/drivers/mmc/host/meson-gx-mmc.c
@@ -78,16 +78,22 @@
#define STATUS_BUSY BIT(31)
#define SD_EMMC_IRQ_EN 0x4c
-#define IRQ_EN_MASK GENMASK(13, 0)
#define IRQ_RXD_ERR_MASK GENMASK(7, 0)
#define IRQ_TXD_ERR BIT(8)
#define IRQ_DESC_ERR BIT(9)
#define IRQ_RESP_ERR BIT(10)
+#define IRQ_CRC_ERR \
+ (IRQ_RXD_ERR_MASK | IRQ_TXD_ERR | IRQ_DESC_ERR | IRQ_RESP_ERR)
#define IRQ_RESP_TIMEOUT BIT(11)
#define IRQ_DESC_TIMEOUT BIT(12)
+#define IRQ_TIMEOUTS \
+ (IRQ_RESP_TIMEOUT | IRQ_DESC_TIMEOUT)
#define IRQ_END_OF_CHAIN BIT(13)
#define IRQ_RESP_STATUS BIT(14)
#define IRQ_SDIO BIT(15)
+#define IRQ_EN_MASK \
+ (IRQ_CRC_ERR | IRQ_TIMEOUTS | IRQ_END_OF_CHAIN | IRQ_RESP_STATUS |\
+ IRQ_SDIO)
#define SD_EMMC_CMD_CFG 0x50
#define SD_EMMC_CMD_ARG 0x54
@@ -761,57 +767,40 @@ static irqreturn_t meson_mmc_irq(int irq, void *dev_id)
struct mmc_data *data;
u32 irq_en, status, raw_status;
unsigned long flag;
- irqreturn_t ret = IRQ_HANDLED;
+ irqreturn_t ret = IRQ_NONE;
- if (WARN_ON(!host))
+ if (WARN_ON(!host) || WARN_ON(!host->cmd))
return IRQ_NONE;
- cmd = host->cmd;
-
- if (WARN_ON(!cmd))
- return IRQ_NONE;
+ spin_lock_irqsave(&host->lock, flag);
+ cmd = host->cmd;
data = cmd->data;
-
- spin_lock_irqsave(&host->lock, flag);
irq_en = readl(host->regs + SD_EMMC_IRQ_EN);
raw_status = readl(host->regs + SD_EMMC_STATUS);
status = raw_status & irq_en;
- if (!status) {
- dev_warn(host->dev, "Spurious IRQ! status=0x%08x, irq_en=0x%08x\n",
- raw_status, irq_en);
- ret = IRQ_NONE;
- goto out;
- }
-
- meson_mmc_read_resp(host->mmc, cmd);
-
cmd->error = 0;
- if (status & IRQ_RXD_ERR_MASK) {
- dev_dbg(host->dev, "Unhandled IRQ: RXD error\n");
- cmd->error = -EILSEQ;
- }
- if (status & IRQ_TXD_ERR) {
- dev_dbg(host->dev, "Unhandled IRQ: TXD error\n");
- cmd->error = -EILSEQ;
- }
- if (status & IRQ_DESC_ERR)
- dev_dbg(host->dev, "Unhandled IRQ: Descriptor error\n");
- if (status & IRQ_RESP_ERR) {
- dev_dbg(host->dev, "Unhandled IRQ: Response error\n");
+ if (status & IRQ_CRC_ERR) {
+ dev_dbg(host->dev, "CRC Error - status 0x%08x\n", status);
cmd->error = -EILSEQ;
+ ret = IRQ_HANDLED;
+ goto out;
}
- if (status & IRQ_RESP_TIMEOUT) {
- dev_dbg(host->dev, "Unhandled IRQ: Response timeout\n");
+
+ if (status & IRQ_TIMEOUTS) {
+ dev_dbg(host->dev, "Timeout - status 0x%08x\n", status);
cmd->error = -ETIMEDOUT;
+ ret = IRQ_HANDLED;
+ goto out;
}
- if (status & IRQ_DESC_TIMEOUT) {
- dev_dbg(host->dev, "Unhandled IRQ: Descriptor timeout\n");
- cmd->error = -ETIMEDOUT;
+
+ meson_mmc_read_resp(host->mmc, cmd);
+
+ if (status & IRQ_SDIO) {
+ dev_dbg(host->dev, "IRQ: SDIO TODO.\n");
+ ret = IRQ_HANDLED;
}
- if (status & IRQ_SDIO)
- dev_dbg(host->dev, "Unhandled IRQ: SDIO.\n");
if (status & (IRQ_END_OF_CHAIN | IRQ_RESP_STATUS)) {
if (data && !cmd->error)
@@ -819,26 +808,20 @@ static irqreturn_t meson_mmc_irq(int irq, void *dev_id)
if (meson_mmc_bounce_buf_read(data) ||
meson_mmc_get_next_command(cmd))
ret = IRQ_WAKE_THREAD;
- } else {
- dev_warn(host->dev, "Unknown IRQ! status=0x%04x: MMC CMD%u arg=0x%08x flags=0x%08x stop=%d\n",
- status, cmd->opcode, cmd->arg,
- cmd->flags, cmd->mrq->stop ? 1 : 0);
- if (cmd->data) {
- struct mmc_data *data = cmd->data;
-
- dev_warn(host->dev, "\tblksz %u blocks %u flags 0x%08x (%s%s)",
- data->blksz, data->blocks, data->flags,
- data->flags & MMC_DATA_WRITE ? "write" : "",
- data->flags & MMC_DATA_READ ? "read" : "");
- }
+ else
+ ret = IRQ_HANDLED;
}
out:
- /* ack all (enabled) interrupts */
- writel(status, host->regs + SD_EMMC_STATUS);
+ /* ack all enabled interrupts */
+ writel(irq_en, host->regs + SD_EMMC_STATUS);
if (ret == IRQ_HANDLED)
meson_mmc_request_done(host->mmc, cmd->mrq);
+ else if (ret == IRQ_NONE)
+ dev_warn(host->dev,
+ "Unexpected IRQ! status=0x%08x, irq_en=0x%08x\n",
+ raw_status, irq_en);
spin_unlock_irqrestore(&host->lock, flag);
return ret;
@@ -1018,10 +1001,12 @@ static int meson_mmc_probe(struct platform_device *pdev)
/* Stop execution */
writel(0, host->regs + SD_EMMC_START);
- /* clear, ack, enable all interrupts */
+ /* clear, ack and enable interrupts */
writel(0, host->regs + SD_EMMC_IRQ_EN);
- writel(IRQ_EN_MASK, host->regs + SD_EMMC_STATUS);
- writel(IRQ_EN_MASK, host->regs + SD_EMMC_IRQ_EN);
+ writel(IRQ_CRC_ERR | IRQ_TIMEOUTS | IRQ_END_OF_CHAIN,
+ host->regs + SD_EMMC_STATUS);
+ writel(IRQ_CRC_ERR | IRQ_TIMEOUTS | IRQ_END_OF_CHAIN,
+ host->regs + SD_EMMC_IRQ_EN);
ret = devm_request_threaded_irq(&pdev->dev, irq, meson_mmc_irq,
meson_mmc_irq_thread, IRQF_SHARED,
--
2.9.5
More information about the linux-amlogic
mailing list