[PATCH 03/14] mmc: meson-gx: clean up some constants

Jerome Brunet jbrunet at baylibre.com
Mon Aug 21 04:54:57 PDT 2017


On Mon, 2017-08-07 at 14:06 -0700, Kevin Hilman wrote:
> Jerome Brunet <jbrunet at baylibre.com> writes:
> 
> > Remove useless clock rate defines. These should not be defined but
> 
> To be more precise, they're also unused, so maybe s/useless/unused/ ?
> 
> > equested from the clock framework.
> 
> s/equested/requested/
> 

Thx Kevin !

> > Also correct typo on the DELAY register
> > 
> > Signed-off-by: Jerome Brunet <jbrunet at baylibre.com>
> 
> Otherwise,
> 
> Reviewed-by: Kevin Hilman <khilman at baylibre.com>
> 
> > ---
> >  drivers/mmc/host/meson-gx-mmc.c | 4 +---
> >  1 file changed, 1 insertion(+), 3 deletions(-)
> > 
> > diff --git a/drivers/mmc/host/meson-gx-mmc.c b/drivers/mmc/host/meson-gx-
> > mmc.c
> > index d480a8052a06..8a74a048db88 100644
> > --- a/drivers/mmc/host/meson-gx-mmc.c
> > +++ b/drivers/mmc/host/meson-gx-mmc.c
> > @@ -45,9 +45,7 @@
> >  #define   CLK_DIV_MAX 63
> >  #define   CLK_SRC_MASK GENMASK(7, 6)
> >  #define   CLK_SRC_XTAL 0   /* external crystal */
> > -#define   CLK_SRC_XTAL_RATE 24000000
> >  #define   CLK_SRC_PLL 1    /* FCLK_DIV2 */
> > -#define   CLK_SRC_PLL_RATE 1000000000
> >  #define   CLK_CORE_PHASE_MASK GENMASK(9, 8)
> >  #define   CLK_TX_PHASE_MASK GENMASK(11, 10)
> >  #define   CLK_RX_PHASE_MASK GENMASK(13, 12)
> > @@ -57,7 +55,7 @@
> >  #define   CLK_PHASE_270 3
> >  #define   CLK_ALWAYS_ON BIT(24)
> >  
> > -#define SD_EMMC_DElAY 0x4
> > +#define SD_EMMC_DELAY 0x4
> >  #define SD_EMMC_ADJUST 0x8
> >  #define SD_EMMC_CALOUT 0x10
> >  #define SD_EMMC_START 0x40




More information about the linux-amlogic mailing list