[PATCH] media: rc: meson-ir: switch config to NEC decoding on shutdown

Neil Armstrong narmstrong at baylibre.com
Tue Apr 25 00:41:09 PDT 2017


From: Alex Deryskyba <alex at codesnake.com>

On the Amlogic SoCs, the bootloader firmware can handle the IR hardware in
order to Wake up or Power back the system when in suspend on shutdown mode.

This patch switches the hardware configuration in a state usable by the
firmware to permit powering the system back.

Some vendor bootloader firmware were modified to switch to this configuration
but it may not be the case for all available products.

This patch was originally posted at [1].

[1] https://github.com/LibreELEC/linux-amlogic/pull/27

Signed-off-by: Alex Deryskyba <alex at codesnake.com>
Signed-off-by: Neil Armstrong <narmstrong at baylibre.com>
---
 drivers/media/rc/meson-ir.c | 27 +++++++++++++++++++++++++++
 1 file changed, 27 insertions(+)

diff --git a/drivers/media/rc/meson-ir.c b/drivers/media/rc/meson-ir.c
index 42ae2ec..0632f6a 100644
--- a/drivers/media/rc/meson-ir.c
+++ b/drivers/media/rc/meson-ir.c
@@ -211,6 +211,32 @@ static int meson_ir_remove(struct platform_device *pdev)
 	return 0;
 }
 
+static void meson_ir_shutdown(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct device_node *node = dev->of_node;
+	struct meson_ir *ir = platform_get_drvdata(pdev);
+	unsigned long flags;
+
+	spin_lock_irqsave(&ir->lock, flags);
+
+	/*
+	 * Set operation mode to NEC/hardware decoding to give
+	 * bootloader a chance to power the system back on
+	 */
+	if (of_device_is_compatible(node, "amlogic,meson6-ir"))
+		meson_ir_set_mask(ir, IR_DEC_REG1, REG1_MODE_MASK,
+				DECODE_MODE_NEC << REG1_MODE_SHIFT);
+	else
+		meson_ir_set_mask(ir, IR_DEC_REG2, REG2_MODE_MASK,
+				DECODE_MODE_NEC << REG2_MODE_SHIFT);
+
+	/* Set rate to default value */
+	meson_ir_set_mask(ir, IR_DEC_REG0, REG0_RATE_MASK, 0x13);
+
+	spin_unlock_irqrestore(&ir->lock, flags);
+}
+
 static const struct of_device_id meson_ir_match[] = {
 	{ .compatible = "amlogic,meson6-ir" },
 	{ .compatible = "amlogic,meson8b-ir" },
@@ -222,6 +248,7 @@ static int meson_ir_remove(struct platform_device *pdev)
 static struct platform_driver meson_ir_driver = {
 	.probe		= meson_ir_probe,
 	.remove		= meson_ir_remove,
+	.shutdown	= meson_ir_shutdown,
 	.driver = {
 		.name		= DRIVER_NAME,
 		.of_match_table	= meson_ir_match,
-- 
1.9.1




More information about the linux-amlogic mailing list