[PATCH v2 2/2] clk: meson: mpll: use 64bit math in rate_from_params
Jerome Brunet
jbrunet at baylibre.com
Fri Apr 7 08:34:33 PDT 2017
From: Martin Blumenstingl <martin.blumenstingl at googlemail.com>
On Meson8b the MPLL parent clock (fixed_pll) has a rate of 2550MHz.
Multiplying this with SDM_DEN results in a value greater than 32bits.
This is not a problem on the 64bit Meson GX SoCs, but it may result in
undefined behavior on the older 32bit Meson8b SoC.
While rate_from_params was only introduced recently to make the math
reusable from _round_rate and _recalc_rate the original bug exists much
longer.
Fixes: 1c50da4f27 ("clk: meson: add mpll support")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl at googlemail.com>
[as discussed on the ml, use DIV_ROUND_UP_ULL]
Signed-off-by: Jerome Brunet <jbrunet at baylibre.com>
---
drivers/clk/meson/clk-mpll.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/clk/meson/clk-mpll.c b/drivers/clk/meson/clk-mpll.c
index d9462b505dcc..39eab69fe51a 100644
--- a/drivers/clk/meson/clk-mpll.c
+++ b/drivers/clk/meson/clk-mpll.c
@@ -79,7 +79,7 @@ static long rate_from_params(unsigned long parent_rate,
if (n2 < N2_MIN)
return -EINVAL;
- return (parent_rate * SDM_DEN) / divisor;
+ return DIV_ROUND_UP_ULL((u64)parent_rate * SDM_DEN, divisor);
}
static void params_from_rate(unsigned long requested_rate,
--
2.9.3
More information about the linux-amlogic
mailing list