[PATCH v2 3/6] phy: meson: add USB2 PHY support for Meson8b and GXBB
Kishon Vijay Abraham I
kishon at ti.com
Fri Sep 16 21:17:19 PDT 2016
Hi Kevin,
On Wednesday 14 September 2016 09:36 PM, Kevin Hilman wrote:
> Kishon,
>
> Martin Blumenstingl <martin.blumenstingl at googlemail.com> writes:
>
>> This is a new driver for the USB PHY found in Meson8b and GXBB SoCs.
>>
>> Signed-off-by: Martin Blumenstingl <martin.blumenstingl at googlemail.com>
>> Signed-off-by: Jerome Brunet <jbrunet at baylibre.com>
>> Tested-by: Kevin Hilman <khilman at baylibre.com>
>
> Will you be picking this up for v4.9?
It's already late for 4.9. Generally send pull request to Greg around -rc6.
This can go only in 4.10.
Thanks
Kishon
>
> Kevin
>
>> ---
>> drivers/phy/Kconfig | 11 ++
>> drivers/phy/Makefile | 1 +
>> drivers/phy/phy-meson-usb2.c | 280 +++++++++++++++++++++++++++++++++++++++++++
>> 3 files changed, 292 insertions(+)
>> create mode 100644 drivers/phy/phy-meson-usb2.c
>>
>> diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
>> index 19bff3a..6ad87ec 100644
>> --- a/drivers/phy/Kconfig
>> +++ b/drivers/phy/Kconfig
>> @@ -453,4 +453,15 @@ config PHY_NS2_PCIE
>> help
>> Enable this to support the Broadcom Northstar2 PCIe PHY.
>> If unsure, say N.
>> +
>> +config PHY_MESON_USB2
>> + tristate "Meson USB2 PHY driver"
>> + default ARCH_MESON
>> + depends on OF && (ARCH_MESON || COMPILE_TEST)
>> + select GENERIC_PHY
>> + help
>> + Enable this to support the Meson USB2 PHYs found in Meson8b
>> + and GXBB SoCs.
>> + If unsure, say N.
>> +
>> endmenu
>> diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
>> index 90ae198..dd507ac 100644
>> --- a/drivers/phy/Makefile
>> +++ b/drivers/phy/Makefile
>> @@ -56,3 +56,4 @@ obj-$(CONFIG_PHY_PISTACHIO_USB) += phy-pistachio-usb.o
>> obj-$(CONFIG_PHY_CYGNUS_PCIE) += phy-bcm-cygnus-pcie.o
>> obj-$(CONFIG_ARCH_TEGRA) += tegra/
>> obj-$(CONFIG_PHY_NS2_PCIE) += phy-bcm-ns2-pcie.o
>> +obj-$(CONFIG_PHY_MESON_USB2) += phy-meson-usb2.o
>> diff --git a/drivers/phy/phy-meson-usb2.c b/drivers/phy/phy-meson-usb2.c
>> new file mode 100644
>> index 0000000..eece521
>> --- /dev/null
>> +++ b/drivers/phy/phy-meson-usb2.c
>> @@ -0,0 +1,280 @@
>> +/*
>> + * Meson USB2 PHY driver
>> + *
>> + * Copyright (C) 2016 Martin Blumenstingl <martin.blumenstingl at googlemail.com>
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License version 2 as
>> + * published by the Free Software Foundation.
>> + *
>> + * You should have received a copy of the GNU General Public License
>> + * along with this program. If not, see <http://www.gnu.org/licenses/>.
>> + */
>> +
>> +#include <linux/clk.h>
>> +#include <linux/delay.h>
>> +#include <linux/io.h>
>> +#include <linux/module.h>
>> +#include <linux/of_device.h>
>> +#include <linux/reset.h>
>> +#include <linux/phy/phy.h>
>> +#include <linux/platform_device.h>
>> +#include <linux/usb/of.h>
>> +
>> +#define REG_CONFIG 0x00
>> + #define REG_CONFIG_CLK_EN BIT(0)
>> + #define REG_CONFIG_CLK_SEL_MASK GENMASK(3, 1)
>> + #define REG_CONFIG_CLK_DIV_MASK GENMASK(10, 4)
>> + #define REG_CONFIG_CLK_32k_ALTSEL BIT(15)
>> + #define REG_CONFIG_TEST_TRIG BIT(31)
>> +
>> +#define REG_CTRL 0x04
>> + #define REG_CTRL_SOFT_PRST BIT(0)
>> + #define REG_CTRL_SOFT_HRESET BIT(1)
>> + #define REG_CTRL_SS_SCALEDOWN_MODE_MASK GENMASK(3, 2)
>> + #define REG_CTRL_CLK_DET_RST BIT(4)
>> + #define REG_CTRL_INTR_SEL BIT(5)
>> + #define REG_CTRL_CLK_DETECTED BIT(8)
>> + #define REG_CTRL_SOF_SENT_RCVD_TGL BIT(9)
>> + #define REG_CTRL_SOF_TOGGLE_OUT BIT(10)
>> + #define REG_CTRL_POWER_ON_RESET BIT(15)
>> + #define REG_CTRL_SLEEPM BIT(16)
>> + #define REG_CTRL_TX_BITSTUFF_ENN_H BIT(17)
>> + #define REG_CTRL_TX_BITSTUFF_ENN BIT(18)
>> + #define REG_CTRL_COMMON_ON BIT(19)
>> + #define REG_CTRL_REF_CLK_SEL_MASK GENMASK(21, 20)
>> + #define REG_CTRL_REF_CLK_SEL_SHIFT 20
>> + #define REG_CTRL_FSEL_MASK GENMASK(24, 22)
>> + #define REG_CTRL_FSEL_SHIFT 22
>> + #define REG_CTRL_PORT_RESET BIT(25)
>> + #define REG_CTRL_THREAD_ID_MASK GENMASK(31, 26)
>> +
>> +#define REG_ENDP_INTR 0x08
>> +
>> +/* bits [31:26], [24:21] and [15:3] seem to be read-only */
>> +#define REG_ADP_BC 0x0c
>> + #define REG_ADP_BC_VBUS_VLD_EXT_SEL BIT(0)
>> + #define REG_ADP_BC_VBUS_VLD_EXT BIT(1)
>> + #define REG_ADP_BC_OTG_DISABLE BIT(2)
>> + #define REG_ADP_BC_ID_PULLUP BIT(3)
>> + #define REG_ADP_BC_DRV_VBUS BIT(4)
>> + #define REG_ADP_BC_ADP_PRB_EN BIT(5)
>> + #define REG_ADP_BC_ADP_DISCHARGE BIT(6)
>> + #define REG_ADP_BC_ADP_CHARGE BIT(7)
>> + #define REG_ADP_BC_SESS_END BIT(8)
>> + #define REG_ADP_BC_DEVICE_SESS_VLD BIT(9)
>> + #define REG_ADP_BC_B_VALID BIT(10)
>> + #define REG_ADP_BC_A_VALID BIT(11)
>> + #define REG_ADP_BC_ID_DIG BIT(12)
>> + #define REG_ADP_BC_VBUS_VALID BIT(13)
>> + #define REG_ADP_BC_ADP_PROBE BIT(14)
>> + #define REG_ADP_BC_ADP_SENSE BIT(15)
>> + #define REG_ADP_BC_ACA_ENABLE BIT(16)
>> + #define REG_ADP_BC_DCD_ENABLE BIT(17)
>> + #define REG_ADP_BC_VDAT_DET_EN_B BIT(18)
>> + #define REG_ADP_BC_VDAT_SRC_EN_B BIT(19)
>> + #define REG_ADP_BC_CHARGE_SEL BIT(20)
>> + #define REG_ADP_BC_CHARGE_DETECT BIT(21)
>> + #define REG_ADP_BC_ACA_PIN_RANGE_C BIT(22)
>> + #define REG_ADP_BC_ACA_PIN_RANGE_B BIT(23)
>> + #define REG_ADP_BC_ACA_PIN_RANGE_A BIT(24)
>> + #define REG_ADP_BC_ACA_PIN_GND BIT(25)
>> + #define REG_ADP_BC_ACA_PIN_FLOAT BIT(26)
>> +
>> +#define REG_DBG_UART 0x14
>> +
>> +#define REG_TEST 0x18
>> + #define REG_TEST_DATA_IN_MASK GENMASK(3, 0)
>> + #define REG_TEST_EN_MASK GENMASK(7, 4)
>> + #define REG_TEST_ADDR_MASK GENMASK(11, 8)
>> + #define REG_TEST_DATA_OUT_SEL BIT(12)
>> + #define REG_TEST_CLK BIT(13)
>> + #define REG_TEST_VA_TEST_EN_B_MASK GENMASK(15, 14)
>> + #define REG_TEST_DATA_OUT_MASK GENMASK(19, 16)
>> + #define REG_TEST_DISABLE_ID_PULLUP BIT(20)
>> +
>> +#define REG_TUNE 0x1c
>> + #define REG_TUNE_TX_RES_TUNE_MASK GENMASK(1, 0)
>> + #define REG_TUNE_TX_HSXV_TUNE_MASK GENMASK(3, 2)
>> + #define REG_TUNE_TX_VREF_TUNE_MASK GENMASK(7, 4)
>> + #define REG_TUNE_TX_RISE_TUNE_MASK GENMASK(9, 8)
>> + #define REG_TUNE_TX_PREEMP_PULSE_TUNE BIT(10)
>> + #define REG_TUNE_TX_PREEMP_AMP_TUNE_MASK GENMASK(12, 11)
>> + #define REG_TUNE_TX_FSLS_TUNE_MASK GENMASK(16, 13)
>> + #define REG_TUNE_SQRX_TUNE_MASK GENMASK(19, 17)
>> + #define REG_TUNE_OTG_TUNE GENMASK(22, 20)
>> + #define REG_TUNE_COMP_DIS_TUNE GENMASK(25, 23)
>> + #define REG_TUNE_HOST_DM_PULLDOWN BIT(26)
>> + #define REG_TUNE_HOST_DP_PULLDOWN BIT(27)
>> +
>> +#define RESET_COMPLETE_TIME 500
>> +#define ACA_ENABLE_COMPLETE_TIME 50
>> +
>> +struct phy_meson_usb2_priv {
>> + void __iomem *regs;
>> + enum usb_dr_mode dr_mode;
>> + struct clk *clk_usb_general;
>> + struct clk *clk_usb;
>> +};
>> +
>> +static u32 phy_meson_usb2_read(struct phy_meson_usb2_priv *phy_priv, u32 reg)
>> +{
>> + return readl(phy_priv->regs + reg);
>> +}
>> +
>> +static void phy_meson_usb2_mask_bits(struct phy_meson_usb2_priv *phy_priv,
>> + u32 reg, u32 mask, u32 value)
>> +{
>> + u32 data;
>> +
>> + data = phy_meson_usb2_read(phy_priv, reg);
>> + data &= ~mask;
>> + data |= (value & mask);
>> +
>> + writel(data, phy_priv->regs + reg);
>> +}
>> +
>> +static int phy_meson_usb2_power_on(struct phy *phy)
>> +{
>> + struct phy_meson_usb2_priv *priv = phy_get_drvdata(phy);
>> + int ret;
>> +
>> + ret = clk_prepare_enable(priv->clk_usb_general);
>> + if (ret) {
>> + dev_err(&phy->dev, "Failed to enable USB general clock\n");
>> + return ret;
>> + }
>> +
>> + ret = clk_prepare_enable(priv->clk_usb);
>> + if (ret) {
>> + dev_err(&phy->dev, "Failed to enable USB DDR clock\n");
>> + return ret;
>> + }
>> +
>> + phy_meson_usb2_mask_bits(priv, REG_CONFIG, REG_CONFIG_CLK_32k_ALTSEL,
>> + REG_CONFIG_CLK_32k_ALTSEL);
>> +
>> + phy_meson_usb2_mask_bits(priv, REG_CTRL, REG_CTRL_REF_CLK_SEL_MASK,
>> + 0x2 << REG_CTRL_REF_CLK_SEL_SHIFT);
>> +
>> + phy_meson_usb2_mask_bits(priv, REG_CTRL, REG_CTRL_FSEL_MASK,
>> + 0x5 << REG_CTRL_FSEL_SHIFT);
>> +
>> + /* reset the PHY */
>> + phy_meson_usb2_mask_bits(priv, REG_CTRL, REG_CTRL_POWER_ON_RESET,
>> + REG_CTRL_POWER_ON_RESET);
>> + udelay(RESET_COMPLETE_TIME);
>> + phy_meson_usb2_mask_bits(priv, REG_CTRL, REG_CTRL_POWER_ON_RESET, 0);
>> + udelay(RESET_COMPLETE_TIME);
>> +
>> + phy_meson_usb2_mask_bits(priv, REG_CTRL, REG_CTRL_SOF_TOGGLE_OUT,
>> + REG_CTRL_SOF_TOGGLE_OUT);
>> +
>> + if (priv->dr_mode == USB_DR_MODE_HOST) {
>> + phy_meson_usb2_mask_bits(priv, REG_ADP_BC,
>> + REG_ADP_BC_ACA_ENABLE,
>> + REG_ADP_BC_ACA_ENABLE);
>> +
>> + udelay(ACA_ENABLE_COMPLETE_TIME);
>> +
>> + if (phy_meson_usb2_read(priv, REG_ADP_BC) &
>> + REG_ADP_BC_ACA_PIN_FLOAT) {
>> + dev_warn(&phy->dev, "USB ID detect failed!\n");
>> + return -EINVAL;
>> + }
>> + }
>> +
>> + return 0;
>> +}
>> +
>> +static int phy_meson_usb2_power_off(struct phy *phy)
>> +{
>> + struct phy_meson_usb2_priv *priv = phy_get_drvdata(phy);
>> +
>> + clk_disable_unprepare(priv->clk_usb);
>> + clk_disable_unprepare(priv->clk_usb_general);
>> +
>> + return 0;
>> +}
>> +
>> +static const struct phy_ops phy_meson_usb2_ops = {
>> + .power_on = phy_meson_usb2_power_on,
>> + .power_off = phy_meson_usb2_power_off,
>> + .owner = THIS_MODULE,
>> +};
>> +
>> +static int phy_meson_usb2_probe(struct platform_device *pdev)
>> +{
>> + struct phy_meson_usb2_priv *priv;
>> + struct resource *res;
>> + struct phy *phy;
>> + struct phy_provider *phy_provider;
>> + int ret;
>> +
>> + priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
>> + if (!priv)
>> + return -ENOMEM;
>> +
>> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>> + priv->regs = devm_ioremap_resource(&pdev->dev, res);
>> + if (IS_ERR(priv->regs))
>> + return PTR_ERR(priv->regs);
>> +
>> + priv->clk_usb_general = devm_clk_get(&pdev->dev, "usb_general");
>> + if (IS_ERR(priv->clk_usb_general))
>> + return PTR_ERR(priv->clk_usb_general);
>> +
>> + priv->clk_usb = devm_clk_get(&pdev->dev, "usb");
>> + if (IS_ERR(priv->clk_usb))
>> + return PTR_ERR(priv->clk_usb);
>> +
>> + priv->dr_mode = of_usb_get_dr_mode_by_phy(pdev->dev.of_node, -1);
>> + if (priv->dr_mode == USB_DR_MODE_UNKNOWN) {
>> + dev_err(&pdev->dev,
>> + "missing dual role configuration of the controller\n");
>> + return -EINVAL;
>> + }
>> +
>> + phy = devm_phy_create(&pdev->dev, NULL, &phy_meson_usb2_ops);
>> + if (IS_ERR(phy)) {
>> + dev_err(&pdev->dev, "failed to create PHY\n");
>> + return PTR_ERR(phy);
>> + }
>> +
>> + /*
>> + * No actual error check here because the hardware only has one reset
>> + * line for both PHYs. Using a shared reset is not possible because we
>> + * must call reset_control_reset to trigger the reset (which is not
>> + * allowed for shared resets in the reset framework).
>> + */
>> + ret = device_reset_optional(&pdev->dev);
>> + if (ret == -EPROBE_DEFER)
>> + return ret;
>> +
>> + phy_set_drvdata(phy, priv);
>> +
>> + phy_provider =
>> + devm_of_phy_provider_register(&pdev->dev, of_phy_simple_xlate);
>> +
>> + return PTR_ERR_OR_ZERO(phy_provider);
>> +}
>> +
>> +static const struct of_device_id phy_meson_usb2_of_match[] = {
>> + { .compatible = "amlogic,meson8b-usb2-phy", },
>> + { .compatible = "amlogic,meson-gxbb-usb2-phy", },
>> + { },
>> +};
>> +MODULE_DEVICE_TABLE(of, phy_meson_usb2_of_match);
>> +
>> +static struct platform_driver phy_meson_usb2_driver = {
>> + .probe = phy_meson_usb2_probe,
>> + .driver = {
>> + .name = "phy-meson-usb2",
>> + .of_match_table = phy_meson_usb2_of_match,
>> + },
>> +};
>> +module_platform_driver(phy_meson_usb2_driver);
>> +
>> +MODULE_AUTHOR("Martin Blumenstingl <martin.blumenstingl at googlemail.com>");
>> +MODULE_DESCRIPTION("Meson USB2 PHY driver");
>> +MODULE_LICENSE("GPL");
More information about the linux-amlogic
mailing list