[PATCH v2 3/6] phy: meson: add USB2 PHY support for Meson8b and GXBB
Martin Blumenstingl
martin.blumenstingl at googlemail.com
Wed Sep 14 14:30:06 PDT 2016
On Sun, Sep 11, 2016 at 3:41 PM, Martin Blumenstingl
<martin.blumenstingl at googlemail.com> wrote:
> This is a new driver for the USB PHY found in Meson8b and GXBB SoCs.
>
> Signed-off-by: Martin Blumenstingl <martin.blumenstingl at googlemail.com>
> Signed-off-by: Jerome Brunet <jbrunet at baylibre.com>
> Tested-by: Kevin Hilman <khilman at baylibre.com>
> ---
> drivers/phy/Kconfig | 11 ++
> drivers/phy/Makefile | 1 +
> drivers/phy/phy-meson-usb2.c | 280 +++++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 292 insertions(+)
> create mode 100644 drivers/phy/phy-meson-usb2.c
>
> diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
> index 19bff3a..6ad87ec 100644
> --- a/drivers/phy/Kconfig
> +++ b/drivers/phy/Kconfig
> @@ -453,4 +453,15 @@ config PHY_NS2_PCIE
> help
> Enable this to support the Broadcom Northstar2 PCIe PHY.
> If unsure, say N.
> +
> +config PHY_MESON_USB2
> + tristate "Meson USB2 PHY driver"
> + default ARCH_MESON
> + depends on OF && (ARCH_MESON || COMPILE_TEST)
> + select GENERIC_PHY
as pointed out by Arnd Bergmann (see [0]) this is missing a "select
USB_COMMON", just like the PHY_SUN4I_USB and PHY_SUN9I_USB drivers as
we use of_usb_get_dr_mode_by_phy() to get the mode of the USB
controller (as the PHY needs special configuration for host-mode).
I will send an update on Sunday.
Regards,
Martin
[0] http://marc.info/?l=linux-usb&m=147386117604824&w=2
More information about the linux-amlogic
mailing list