[PATCH net-next v3 4/4] ARM64: dts: meson: odroidc2: disable advertisement EEE for GbE.
Andreas Färber
afaerber at suse.de
Mon Nov 28 04:31:46 PST 2016
Am 28.11.2016 um 10:46 schrieb Jerome Brunet:
> Signed-off-by: Jerome Brunet <jbrunet at baylibre.com>
> ---
> arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts | 16 ++++++++++++++++
> 1 file changed, 16 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
> index e6e3491d48a5..5624714d2b16 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
> +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
> @@ -46,6 +46,7 @@
>
> #include "meson-gxbb.dtsi"
> #include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/net/mdio.h>
>
> / {
> compatible = "hardkernel,odroid-c2", "amlogic,meson-gxbb";
> @@ -98,3 +99,18 @@
> pinctrl-0 = <&i2c_a_pins>;
> pinctrl-names = "default";
> };
> +
> +ðmac {
> + phy-handle = <ð_phy0>;
> +
> + mdio {
> + compatible = "snps,dwmac-mdio";
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + eth_phy0: ethernet-phy at 0 {
> + reg = <0>;
> + eee-broken-modes = <MDIO_EEE_1000T>;
> + };
> + };
> +};
I've tested this hand-applied because it applies to neither amlogic
v4.10/integ nor linux-next.git and will conflict if applied through the
net-next tree.
Note that there already is an ðmac node that you should be extending
rather than duplicating:
ðmac {
status = "okay";
pinctrl-0 = <ð_rgmii_pins>;
pinctrl-names = "default";
};
If you or your colleagues could please fix the sort order of the nodes
to be alphabetical again (ethmac after i2c_A here; between uart_A and ir
in-tree) this wouldn't happen so easily again.
I therefore suggest to not apply this patch 4/4 through net-next but
through the amlogic tree instead.
Thanks,
Andreas
--
SUSE Linux GmbH, Maxfeldstr. 5, 90409 Nürnberg, Germany
GF: Felix Imendörffer, Jane Smithard, Graham Norton
HRB 21284 (AG Nürnberg)
More information about the linux-amlogic
mailing list