[RFC PATCH v2 1/5] net: mdio-mux-mmioreg: Add support for 16bit and 32bit register sizes
Rob Herring
robh at kernel.org
Wed Nov 9 10:26:10 PST 2016
On Mon, Oct 31, 2016 at 05:56:23PM +0100, Neil Armstrong wrote:
> In order to support PHY switching on Amlogic GXL SoCs, add support for
> 16bit and 32bit registers sizes.
>
> Signed-off-by: Neil Armstrong <narmstrong at baylibre.com>
> ---
> .../devicetree/bindings/net/mdio-mux-mmioreg.txt | 4 +-
> drivers/net/phy/mdio-mux-mmioreg.c | 60 +++++++++++++++++-----
> 2 files changed, 49 insertions(+), 15 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/net/mdio-mux-mmioreg.txt b/Documentation/devicetree/bindings/net/mdio-mux-mmioreg.txt
> index 8516929..065e8bd 100644
> --- a/Documentation/devicetree/bindings/net/mdio-mux-mmioreg.txt
> +++ b/Documentation/devicetree/bindings/net/mdio-mux-mmioreg.txt
> @@ -3,7 +3,7 @@ Properties for an MDIO bus multiplexer controlled by a memory-mapped device
> This is a special case of a MDIO bus multiplexer. A memory-mapped device,
> like an FPGA, is used to control which child bus is connected. The mdio-mux
> node must be a child of the memory-mapped device. The driver currently only
As you're touching this sentence, this describes the binding, not a
driver. With that,
Acked-by: Rob Herring <robh at kernel.org>
> -supports devices with eight-bit registers.
> +supports devices with 8, 16 or 32-bit registers.
>
> Required properties in addition to the generic multiplexer properties:
>
> @@ -11,7 +11,7 @@ Required properties in addition to the generic multiplexer properties:
>
> - reg : integer, contains the offset of the register that controls the bus
> multiplexer. The size field in the 'reg' property is the size of
> - register, and must therefore be 1.
> + register, and must therefore be 1, 2, or 4.
>
> - mux-mask : integer, contains an eight-bit mask that specifies which
> bits in the register control the actual bus multiplexer. The
More information about the linux-amlogic
mailing list