[PATCH v4 2/3] documentation: Add secure monitor binding documentation

Carlo Caione carlo at caione.org
Wed May 25 13:18:30 PDT 2016


From: Carlo Caione <carlo at endlessm.com>

Add the binding documentation for the Amlogic secure monitor driver.

Signed-off-by: Carlo Caione <carlo at endlessm.com>
---
 .../bindings/firmware/meson/meson_sm.txt           | 42 ++++++++++++++++++++++
 1 file changed, 42 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/firmware/meson/meson_sm.txt

diff --git a/Documentation/devicetree/bindings/firmware/meson/meson_sm.txt b/Documentation/devicetree/bindings/firmware/meson/meson_sm.txt
new file mode 100644
index 0000000..896758d
--- /dev/null
+++ b/Documentation/devicetree/bindings/firmware/meson/meson_sm.txt
@@ -0,0 +1,42 @@
+* Amlogic Secure Monitor
+
+In the Amlogic SoCs the Secure Monitor code is used to provide access to the
+NVMEM, enable JTAG, set USB boot, etc...
+
+Required properties for the secure monitor node:
+- compatible: Should be "amlogic,meson-gxbb-sm"
+
+Example:
+
+	#include <dt-bindings/firmware/meson-sm.h>
+
+	...
+
+	firmware {
+		compatible = "simple-bus";
+
+		sm: secure-monitor {
+			compatible = "amlogic,meson-gxbb-sm";
+		};
+	};
+
+Node of a device using the secure monitor must have a custom property to
+specify the SMC32 function ID the driver is going to use.
+
+Example of the node using the secure monitor:
+
+	#include <dt-bindings/firmware/meson-sm.h>
+
+	...
+
+	efuse: efuse {
+		compatible = "amlogic,meson-gxbb-efuse";
+		secure-monitor = <&sm>;
+		amlogic,sm-cmd-read-efuse = <SM_EFUSE_READ>;
+		amlogic,sm-cmd-max-efuse = <SM_EFUSE_USER_MAX>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		...
+	};
+
-- 
2.7.4




More information about the linux-amlogic mailing list