[PATCH v7 0/4] Amlogic Meson GXBaby and ODROID-C2 support
Beniamino Galvani
b.galvani at gmail.com
Sat May 7 23:30:13 PDT 2016
Hi,
this series adds a very basic support for Amlogic S905 SoC (GXBaby)
and for the ODROID-C2 board [1], and is based on u-boot sources
available from the board vendor [2]. At the moment the only supported
devices are the integrated UART and Ethernet adapter.
Changes since v6:
- documented ARCH_MESON Kconfig entry
Changes since v5:
- used default CONFIG_SYS_BAUDRATE_TABLE
- removed check for CONFIG_IDENT_STRING
Changes since v4:
- added patch to implement generic PSCI reset
- used min() macro from linux/kernel.h
Changes since v3:
- designware eth: added check that buffer addresses are in first 4GiB
as suggested by Marek (and thus removed the ack tags)
- consolidated pinmux and gpio macros
- used get_unaligned_be64() to avoid alignment faults in dram_init()
- uint32_t -> u32 in serial_meson.c
- implemented reboot and read from e-fuse through secure monitor
Changes since v2:
- squashed all platform patches into a single one
- got rid of additional non-upstream DTS node for ethernet
- improved board README
- added macros for SoC registers fields
Changes since v1:
- updated DTS files from Linux kernel
- added Ethernet support
- first 16MiB of RAM are now marked as unavailable; this seems to
be required to successfully boot Linux
- fixed typo in config file
[1] http://www.hardkernel.com/main/products/prdt_info.php?g_code=G145457216438
[2] https://github.com/hardkernel/u-boot/tree/odroidc2-v2015.01
Beniamino Galvani (4):
arm: implement generic PSCI reset call for armv8
net: designware: fix descriptor layout and warnings on 64-bit archs
arm: add initial support for Amlogic Meson and ODROID-C2
arm: meson: implement calls to secure monitor
arch/arm/Kconfig | 9 ++
arch/arm/Makefile | 1 +
arch/arm/cpu/armv8/fwcall.c | 16 +++
arch/arm/dts/Makefile | 2 +
arch/arm/dts/meson-gxbb-odroidc2.dts | 69 +++++++++++++
arch/arm/dts/meson-gxbb.dtsi | 178 +++++++++++++++++++++++++++++++++
arch/arm/include/asm/arch-meson/gxbb.h | 52 ++++++++++
arch/arm/include/asm/arch-meson/sm.h | 12 +++
arch/arm/include/asm/psci.h | 17 +++-
arch/arm/include/asm/system.h | 2 +
arch/arm/mach-meson/Kconfig | 31 ++++++
arch/arm/mach-meson/Makefile | 7 ++
arch/arm/mach-meson/board.c | 67 +++++++++++++
arch/arm/mach-meson/sm.c | 57 +++++++++++
board/hardkernel/odroid-c2/Kconfig | 12 +++
board/hardkernel/odroid-c2/MAINTAINERS | 6 ++
board/hardkernel/odroid-c2/Makefile | 7 ++
board/hardkernel/odroid-c2/README | 60 +++++++++++
board/hardkernel/odroid-c2/odroid-c2.c | 67 +++++++++++++
configs/odroid-c2_defconfig | 23 +++++
drivers/net/designware.c | 59 ++++++-----
drivers/net/designware.h | 4 +-
drivers/serial/Kconfig | 15 +++
drivers/serial/Makefile | 1 +
drivers/serial/serial_meson.c | 162 ++++++++++++++++++++++++++++++
include/configs/odroid-c2.h | 51 ++++++++++
26 files changed, 957 insertions(+), 30 deletions(-)
create mode 100644 arch/arm/dts/meson-gxbb-odroidc2.dts
create mode 100644 arch/arm/dts/meson-gxbb.dtsi
create mode 100644 arch/arm/include/asm/arch-meson/gxbb.h
create mode 100644 arch/arm/include/asm/arch-meson/sm.h
create mode 100644 arch/arm/mach-meson/Kconfig
create mode 100644 arch/arm/mach-meson/Makefile
create mode 100644 arch/arm/mach-meson/board.c
create mode 100644 arch/arm/mach-meson/sm.c
create mode 100644 board/hardkernel/odroid-c2/Kconfig
create mode 100644 board/hardkernel/odroid-c2/MAINTAINERS
create mode 100644 board/hardkernel/odroid-c2/Makefile
create mode 100644 board/hardkernel/odroid-c2/README
create mode 100644 board/hardkernel/odroid-c2/odroid-c2.c
create mode 100644 configs/odroid-c2_defconfig
create mode 100644 drivers/serial/serial_meson.c
create mode 100644 include/configs/odroid-c2.h
--
2.7.3
More information about the linux-amlogic
mailing list