[PATCH v4 2/2] meson-rtc: add device-tree binding

[Ben Dooks]

Add documentation for the AMLogic Meson RTC.

Signed-off-by: Ben Dooks <ben.dooks at codethink.co.uk>
Acked-by: Rob Herring <robh at kernel.org>
---
 .../devicetree/bindings/rtc/rtc-amlogic.txt         | 21 +++++++++++++++++++++
 1 file changed, 21 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/rtc/rtc-amlogic.txt

diff --git a/Documentation/devicetree/bindings/rtc/rtc-amlogic.txt b/Documentation/devicetree/bindings/rtc/rtc-amlogic.txt
new file mode 100644
index 0000000..efc7672
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/rtc-amlogic.txt
@@ -0,0 +1,21 @@
+* AMlogic Meson RTC
+
+Required properties:
+- compatible: should be one of the following describing the hardware:
+	* "amlogic,meson6-rtc"
+	* "amlogic,meson8-rtc"
+	* "amlogic,meson8b-rtc"
+
+- reg: physical register space for the controller's memory mapped registers.
+
+Optional properties:
+- resets: reset controller reference to allow reset of the controller
+- interrupts: single interrupt reference if interrupt support needed
+
+Example:
+
+	rtc: rtc at c8100740 {
+		compatible = "amlogic,meson6-rtc";
+		reg = <0xc8100740 0x14>;
+		status = "disabled";
+	};
-- 
2.8.1