[U-Boot] [PATCH v7 0/4] Amlogic Meson GXBaby and ODROID-C2 support

[Andreas Färber]

Am 11.07.2016 um 21:48 schrieb Beniamino Galvani:
> On Mon, Jul 11, 2016 at 05:23:15AM +0100, Peter Robinson wrote:
>> On Mon, Jul 11, 2016 at 4:57 AM, Andreas Färber <afaerber at suse.de> wrote:
>>> Last output:
>>>
>>> NOTICE:  BL3-1: v1.0(debug):4d2e34d
>>> NOTICE:  BL3-1: Built : 17:08:35, Oct 29 2015
>>> INFO:    BL3-1: Initializing runtime services
>>> INFO:    BL3-1: Preparing for EL3 exit to normal world
>>> INFO:    BL3-1: Next image address = 0x1000000
>>> INFO:    BL3-1: Next image spsr = 0x3c9
>>>
>>> I.e., no U-Boot SPL output on serial.
>>
>> I see similar on Pine64 with 2016.07rc3
> 
> Here the first non-booting commit is:
> 
> commit d73718f3236c520a92efa401084c658e6cc067f3
> Author: Mingkai Hu <mingkai.hu at nxp.com>
> Date:   Thu Jul 7 12:22:12 2016 +0800
> 
>     armv8: Enable CPUECTLR.SMPEN for coherency

Thanks! With that reverted I get:

[...]
NOTICE:  BL3-1: v1.0(debug):4d2e34d
NOTICE:  BL3-1: Built : 17:08:35, Oct 29 2015
INFO:    BL3-1: Initializing runtime services
INFO:    BL3-1: Preparing for EL3 exit to normal world
INFO:    BL3-1: Next image address = 0x1000000
INFO:    BL3-1: Next image spsr = 0x3c9
No match for driver 'eth_designware'
Some drivers were not found


U-Boot 2016.07-00001-g10a9e48 (Jul 11 2016 - 21:58:13 +0200) odroid-c2

DRAM:  2 GiB
No maUsing default environment

In:    serial at 4c0
Out:   serial at 4c0
Err:   serial at 4c0
Net:   No ethernet found.
=>

The eth_designware line (twice, if counting "No ma") is due to what Tom
mentioned wrt DM GPIO, I guess.

Shouldn't we get a version line from SPL, too? A serial driver issue?

Regards,
Andreas

-- 
SUSE Linux GmbH, Maxfeldstr. 5, 90409 Nürnberg, Germany
GF: Felix Imendörffer, Jane Smithard, Graham Norton
HRB 21284 (AG Nürnberg)