[PATCH 3/3] ARM64: dts: amlogic: enable sd_emmc_b on all Tronsmart Vega S95 devices

[Andreas Färber]

Am 08.07.2016 um 02:49 schrieb Andreas Färber:
> Am 25.06.2016 um 18:34 schrieb Martin Blumenstingl:
>> sd_emmc_b is routed to the SD-card. Unlike p20x there is no GPIO
>> regulator, meaning it only supports 3.3V (which seems to be hard-wired).
>>
>> Signed-off-by: Martin Blumenstingl <martin.blumenstingl at googlemail.com>
>> ---
>>  .../boot/dts/amlogic/meson-gxbb-vega-s95.dtsi      | 27 ++++++++++++++++++++++
>>  1 file changed, 27 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi
>> index b003729..3a77829 100644
>> --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi
>> +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi
>> @@ -53,6 +53,17 @@
>>  	chosen {
>>  		stdout-path = "serial0:115200n8";
>>  	};
>> +
>> +	mmc_iv: fixed-regulator {
>> +		compatible = "regulator-fixed";
>> +
>> +		regulator-name = "mmc-supply";
>> +		regulator-min-microvolt = <3300000>;
>> +		regulator-max-microvolt = <3300000>;
>> +
>> +		regulator-always-on;
>> +		regulator-boot-on;
>> +	};
>>  };
>>  
>>  &uart_A {
>> @@ -73,3 +84,19 @@
>>  	pinctrl-0 = <&eth_pins>;
>>  	pinctrl-names = "default";
>>  };
>> +
>> +&sd_emmc_b {
> [snip]
> 
> This does not build on next-20160707 - what branch is this based on?

Apparently linux-amlogic.git v4.7/integ.

Tested-by: Andreas Färber <afaerber at suse.de>

Thanks again,
Andreas

-- 
SUSE Linux GmbH, Maxfeldstr. 5, 90409 Nürnberg, Germany
GF: Felix Imendörffer, Jane Smithard, Graham Norton
HRB 21284 (AG Nürnberg)