[PATCH 01/10] clk: meson8b: make it explicitly non-modular

[Michael Turquette]

Quoting Paul Gortmaker (2016-07-04 14:12:11)
> The Kconfig currently controlling compilation of this code is:
> 
> drivers/clk/meson/Kconfig:config COMMON_CLK_MESON8B
> drivers/clk/meson/Kconfig:      bool
> 
> ...meaning that it currently is not being built as a module by anyone.
> However a recent commit added a bunch of modular boilerplate to this
> driver.
> 
> Lets remove the modular code that is essentially orphaned, so that
> when reading the driver there is no doubt it is builtin-only.
> 
> Since module_init translates to device_initcall in the non-modular
> case, the init ordering remains unchanged with this commit.
> 
> Also note that MODULE DEVICE_TABLE/ALIAS are no-op when non-modular.
> 
> We also delete the MODULE_LICENSE tag etc. since all that information
> was (or is now) contained at the top of the file in the comments.
> 
> Cc: Michael Turquette <mturquette at baylibre.com>
> Cc: Stephen Boyd <sboyd at codeaurora.org>
> Cc: Carlo Caione <carlo at caione.org>
> Cc: Kevin Hilman <khilman at baylibre.com>
> Cc: linux-clk at vger.kernel.org
> Cc: linux-amlogic at lists.infradead.org
> Signed-off-by: Paul Gortmaker <paul.gortmaker at windriver.com>

Applied.

Regards,
Mike

> ---
>  drivers/clk/meson/meson8b-clkc.c | 19 ++++---------------
>  1 file changed, 4 insertions(+), 15 deletions(-)
> 
> diff --git a/drivers/clk/meson/meson8b-clkc.c b/drivers/clk/meson/meson8b-clkc.c
> index b1902e91213d..4c9413cdf373 100644
> --- a/drivers/clk/meson/meson8b-clkc.c
> +++ b/drivers/clk/meson/meson8b-clkc.c
> @@ -1,4 +1,6 @@
>  /*
> + * AmLogic S805 / Meson8b Clock Controller Driver
> + *
>   * Copyright (c) 2015 Endless Mobile, Inc.
>   * Author: Carlo Caione <carlo at endlessm.com>
>   *
> @@ -23,7 +25,7 @@
>  #include <linux/of_address.h>
>  #include <dt-bindings/clock/meson8b-clkc.h>
>  #include <linux/platform_device.h>
> -#include <linux/module.h>
> +#include <linux/init.h>
>  
>  #include "clkc.h"
>  
> @@ -429,7 +431,6 @@ static const struct of_device_id meson8b_clkc_match_table[] = {
>         { .compatible = "amlogic,meson8b-clkc" },
>         { }
>  };
> -MODULE_DEVICE_TABLE(of, meson8b_match_table);
>  
>  static struct platform_driver meson8b_driver = {
>         .probe          = meson8b_clkc_probe,
> @@ -443,16 +444,4 @@ static int __init meson8b_clkc_init(void)
>  {
>         return platform_driver_register(&meson8b_driver);
>  }
> -module_init(meson8b_clkc_init);
> -
> -static void __exit meson8b_clkc_exit(void)
> -{
> -       platform_driver_unregister(&meson8b_driver);
> -}
> -module_exit(meson8b_clkc_exit);
> -
> -MODULE_DESCRIPTION("AmLogic S805 / Meson8b Clock Controller Driver");
> -MODULE_LICENSE("GPL v2");
> -MODULE_ALIAS("platform:meson8b-clkc");
> -MODULE_AUTHOR("Michael Turquette <mturquette at baylibre.com>");
> -MODULE_AUTHOR("Carlo Caione <carlo at endlessm.com>");
> +device_initcall(meson8b_clkc_init);
> -- 
> 2.8.4
>