[PATCH v2] ARM64: dts: meson-gx: Add reserved memory zone and usable memory range
Heinrich Schuchardt
xypron.glpk at gmx.de
Fri Dec 30 06:51:37 PST 2016
On 12/30/2016 02:40 PM, Neil Armstrong wrote:
> The Amlogic Meson GXBB/GXL/GXM secure monitor uses part of the memory space,
> this patch adds this reserved zone and redefines the usable memory range.
>
> Signed-off-by: Neil Armstrong <narmstrong at baylibre.com>
> ---
> Changes since v1 at [1] :
> - Renamed reg into linux,usable-memory to ovveride u-boot memory
> - only kept secmon memory zone
>
> [1] http://lkml.kernel.org/r/20161212101801.28491-1-narmstrong@baylibre.com
>
> arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi | 2 +-
> arch/arm64/boot/dts/amlogic/meson-gx.dtsi | 12 ++++++++++++
> arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts | 2 +-
> arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts | 2 +-
> arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi | 2 +-
> arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95-meta.dts | 2 +-
> arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95-pro.dts | 2 +-
> arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95-telos.dts | 2 +-
> arch/arm64/boot/dts/amlogic/meson-gxl-nexbox-a95x.dts | 2 +-
> arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts | 2 +-
> arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts | 2 +-
> 11 files changed, 22 insertions(+), 10 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi
> index 7a078be..ca3c7fa 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi
> @@ -56,7 +56,7 @@
>
> memory at 0 {
> device_type = "memory";
> - reg = <0x0 0x0 0x0 0x80000000>;
> + linux,usable-memory = <0x0 0x1000000 0x0 0x7f000000>;
> };
>
> vddio_boot: regulator-vddio_boot {
> diff --git a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
> index eada0b5..7f244b5 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
> @@ -55,6 +55,18 @@
> #address-cells = <2>;
> #size-cells = <2>;
>
> + reserved-memory {
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges;
> +
> + /* global autoconfigured region for contiguous allocations */
This comment does not make sense here. It is what you would write over a
compatible to "shared-dma-pool" region. Cf. hi6220-hikey.dts
I suggest you use
/* Amlogic Meson GXBB/GXL/GXM secure monitor reserved memory */
instead.
Doesn't firmware/meson/meson_sm.c already reserve a communication area
to secmon with quite a different address range?
So where is this new region secmon set up? And where is it used?
Best regards
Heinrich
> + secmon: secmon {
> + reg = <0x0 0x10000000 0x0 0x200000>;
> + no-map;
> + };
> + };
> +
> cpus {
> #address-cells = <0x2>;
> #size-cells = <0x0>;
> diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts
> index 4cbd626..c7f008a 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts
> +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts
> @@ -62,7 +62,7 @@
>
> memory at 0 {
> device_type = "memory";
> - reg = <0x0 0x0 0x0 0x40000000>;
> + linux,usable-memory = <0x0 0x1000000 0x0 0x3f000000>;
> };
>
> leds {
> diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
> index 238fbea..546cbe4 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
> +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
> @@ -61,7 +61,7 @@
>
> memory at 0 {
> device_type = "memory";
> - reg = <0x0 0x0 0x0 0x80000000>;
> + linux,usable-memory = <0x0 0x1000000 0x0 0x7f000000>;
> };
>
> usb_otg_pwr: regulator-usb-pwrs {
> diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi
> index 4a96e0f..1fdf6da 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi
> @@ -55,7 +55,7 @@
>
> memory at 0 {
> device_type = "memory";
> - reg = <0x0 0x0 0x0 0x40000000>;
> + linux,usable-memory = <0x0 0x1000000 0x0 0x3f000000>;
> };
>
> usb_pwr: regulator-usb-pwrs {
> diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95-meta.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95-meta.dts
> index 62fb496..6ac5c89 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95-meta.dts
> +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95-meta.dts
> @@ -50,6 +50,6 @@
>
> memory at 0 {
> device_type = "memory";
> - reg = <0x0 0x0 0x0 0x80000000>;
> + linux,usable-memory = <0x0 0x1000000 0x0 0x7f000000>;
> };
> };
> diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95-pro.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95-pro.dts
> index 9a9663a..58be8b4 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95-pro.dts
> +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95-pro.dts
> @@ -50,6 +50,6 @@
>
> memory at 0 {
> device_type = "memory";
> - reg = <0x0 0x0 0x0 0x40000000>;
> + linux,usable-memory = <0x0 0x1000000 0x0 0x3f000000>;
> };
> };
> diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95-telos.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95-telos.dts
> index 2fe167b..010cb29 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95-telos.dts
> +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95-telos.dts
> @@ -50,6 +50,6 @@
>
> memory at 0 {
> device_type = "memory";
> - reg = <0x0 0x0 0x0 0x80000000>;
> + linux,usable-memory = <0x0 0x1000000 0x0 0x7f000000>;
> };
> };
> diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-nexbox-a95x.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-nexbox-a95x.dts
> index cea4a3e..fb4a89b 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-gxl-nexbox-a95x.dts
> +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-nexbox-a95x.dts
> @@ -60,7 +60,7 @@
>
> memory at 0 {
> device_type = "memory";
> - reg = <0x0 0x0 0x0 0x80000000>;
> + linux,usable-memory = <0x0 0x1000000 0x0 0x7f000000>;
> };
>
> vddio_card: gpio-regulator {
> diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts
> index 9639f01..908894c 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts
> +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts
> @@ -59,7 +59,7 @@
>
> memory at 0 {
> device_type = "memory";
> - reg = <0x0 0x0 0x0 0x80000000>;
> + linux,usable-memory = <0x0 0x1000000 0x0 0x7f000000>;
> };
> };
>
> diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts
> index 5a337d3..2077385 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts
> +++ b/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts
> @@ -62,7 +62,7 @@
>
> memory at 0 {
> device_type = "memory";
> - reg = <0x0 0x0 0x0 0x80000000>;
> + linux,usable-memory = <0x0 0x1000000 0x0 0x7f000000>;
> };
>
> vddio_boot: regulator-vddio-boot {
>
More information about the linux-amlogic
mailing list