[PATCH net 3/3] dt: bindings: net: use boolean dt properties for eee broken modes
Jerome Brunet
jbrunet at baylibre.com
Mon Dec 19 07:05:38 PST 2016
The patches regarding eee-broken-modes was merged before all people
involved could find an agreement on the best way to move forward.
While we agreed on having a DT property to mark particular modes as broken,
the value used for eee-broken-modes mapped the phy register in very direct
way. Because of this, the concern is that it could be used to implement
configuration policies instead of describing a broken HW.
In the end, having a boolean property for each mode seems to be preferred
over one bit field value mapping the register (too) directly.
Cc: Florian Fainelli <f.fainelli at gmail.com>
Signed-off-by: Jerome Brunet <jbrunet at baylibre.com>
---
Documentation/devicetree/bindings/net/phy.txt | 10 ++++++++--
include/dt-bindings/net/mdio.h | 19 -------------------
2 files changed, 8 insertions(+), 21 deletions(-)
delete mode 100644 include/dt-bindings/net/mdio.h
diff --git a/Documentation/devicetree/bindings/net/phy.txt b/Documentation/devicetree/bindings/net/phy.txt
index 54749b60a466..ff1bc4b1bb3b 100644
--- a/Documentation/devicetree/bindings/net/phy.txt
+++ b/Documentation/devicetree/bindings/net/phy.txt
@@ -38,8 +38,14 @@ Optional Properties:
- enet-phy-lane-swap: If set, indicates the PHY will swap the TX/RX lanes to
compensate for the board being designed with the lanes swapped.
-- eee-broken-modes: Bits to clear in the MDIO_AN_EEE_ADV register to
- disable EEE broken modes.
+- eee-broken-100tx:
+- eee-broken-1000t:
+- eee-broken-10gt:
+- eee-broken-1000kx:
+- eee-broken-10gkx4:
+- eee-broken-10gkr:
+ Mark the corresponding energy efficient ethernet mode as broken and
+ request the ethernet to stop advertising it.
Example:
diff --git a/include/dt-bindings/net/mdio.h b/include/dt-bindings/net/mdio.h
deleted file mode 100644
index 99c6d903d439..000000000000
--- a/include/dt-bindings/net/mdio.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * This header provides generic constants for ethernet MDIO bindings
- */
-
-#ifndef _DT_BINDINGS_NET_MDIO_H
-#define _DT_BINDINGS_NET_MDIO_H
-
-/*
- * EEE capability Advertisement
- */
-
-#define MDIO_EEE_100TX 0x0002 /* 100TX EEE cap */
-#define MDIO_EEE_1000T 0x0004 /* 1000T EEE cap */
-#define MDIO_EEE_10GT 0x0008 /* 10GT EEE cap */
-#define MDIO_EEE_1000KX 0x0010 /* 1000KX EEE cap */
-#define MDIO_EEE_10GKX4 0x0020 /* 10G KX4 EEE cap */
-#define MDIO_EEE_10GKR 0x0040 /* 10G KR EEE cap */
-
-#endif
--
2.7.4
More information about the linux-amlogic
mailing list