[RFT PATCH] ARM64: dts: meson-gxbb: Add reserved memory zone and usable memory range

[Heinrich Schuchardt]

On 12/14/2016 10:52 AM, Neil Armstrong wrote:
> On 12/12/2016 10:22 PM, Heinrich Schuchardt wrote:
>> On 12/12/2016 11:18 AM, Neil Armstrong wrote:
>>> The Amlogic Meson GXBB secure monitor uses part of the memory space, this
>>> patch adds these reserved zones and redefines the usable memory range for
>>> each boards.
>>>
>>> Signed-off-by: Neil Armstrong <narmstrong at baylibre.com>
>>> ---
>>>  arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi |  2 +-
>>>  arch/arm64/boot/dts/amlogic/meson-gx.dtsi           | 21 +++++++++++++++++++++
>>>  .../boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts     |  2 +-
>>>  arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts |  2 +-
>>>  arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi    |  2 +-
>>>  .../boot/dts/amlogic/meson-gxbb-vega-s95-meta.dts   |  2 +-
>>>  .../boot/dts/amlogic/meson-gxbb-vega-s95-pro.dts    |  2 +-
>>>  .../boot/dts/amlogic/meson-gxbb-vega-s95-telos.dts  |  2 +-
>>>  .../boot/dts/amlogic/meson-gxl-nexbox-a95x.dts      |  2 +-
>>>  .../arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts |  2 +-
>>>  arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts |  2 +-
>>>  11 files changed, 31 insertions(+), 10 deletions(-)
>>>
>>> diff --git a/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi
>>> index 7a078be..ac40b2d 100644
>>> --- a/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi
>>> +++ b/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi
>>> @@ -56,7 +56,7 @@
>>>  
>>>  	memory at 0 {
>>>  		device_type = "memory";
>>> -		reg = <0x0 0x0 0x0 0x80000000>;
>>> +		reg = <0x0 0x1000000 0x0 0x7f000000>;
>>>  	};
>>>  
>>>  	vddio_boot: regulator-vddio_boot {
>>> diff --git a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
>>> index fc033c0..e085588 100644
>>> --- a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
>>> +++ b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
>>> @@ -55,6 +55,27 @@
>>>  	#address-cells = <2>;
>>>  	#size-cells = <2>;
>>>  
>>> +	reserved-memory {
>>> +		#address-cells = <2>;
>>> +		#size-cells = <2>;
>>> +		ranges;
>>> +
>>> +		secos: secos {
>>> +			reg = <0x0 0x05300000 0x0 0x2000000>;
>>> +			no-map;
>>> +		};
>>
>> Hello Neil,
>>
>> In
>> https://github.com/hardkernel/linux/blob/odroidc2-3.14.y/arch/arm64/boot/dts/meson64_odroidc2.dts
>> the secos region does not exist. In linux-next I find no reference to
>> the secos label. Where is the consumer of the region defined?
>>
>>> +
>>> +		pstore: pstore {
>>> +			reg = <0x0 0x07300000 0x0 0x100000>;
>>> +			no-map;
>>> +		};
>>
>> In
>> https://github.com/hardkernel/linux/blob/odroidc2-3.14.y/arch/arm64/boot/dts/amlogic/gxbb_skt.dts
>> and other files pstore uses a different position
>> (reg = <0x0 0x20000000 0x0 0x100000>;).
>> Why are we moving this?
>> Should this region be marked
>> compatible = "ramoops"; ?
>> Cf. Documentation/devicetree/bindings/reserved-memory/ramoops.txt.
>>
>> It would be nice if you could add a short description of each reserved
>> area to the commit message.
>>
>> Regards
>>
>> Heinrich Schuchardt
>>
>>> +
>>> +		secmon: secmon {
>>> +			reg = <0x0 0x10000000 0x0 0x200000>;
>>> +			no-map;
>>> +		};
>>> +	};
>>> +
>>>  	cpus {
>>>  		#address-cells = <0x2>;
>>>  		#size-cells = <0x0>;
>>
>>
> 
> Hi Heinrich,
> 
> Thanks for testing and for the report,
> we are still struggling into finding what are these zones and how to label them correctly.
> 
> We need to identify the zones on all boards, the patch I provided works on a non-odroid-c2 and gxm and gxl boards.
> 
> Neil
> 

Hi Neil,

the 3.14 Ubuntu kernel provided by Hardkernel for Odroid C2 has no fixed
address reserved-memory inside the first 2GB and does not show the
problem I have been observing with the linux-next kernel.

Many zones for interfacing different peripherals are defined but these
are all above 2GB.

For small loads I never saw any oops. So I recommend that on the boards
which you think are working, make a full linux-next git checkout and try
to build the kernel natively for the respective board.

Best regards

Heinrich Schuchardt