[RFT PATCH] ARM64: dts: meson-gxbb: Add reserved memory zone and usable memory range

Heinrich Schuchardt xypron.glpk at gmx.de
Mon Dec 12 13:22:11 PST 2016


On 12/12/2016 11:18 AM, Neil Armstrong wrote:
> The Amlogic Meson GXBB secure monitor uses part of the memory space, this
> patch adds these reserved zones and redefines the usable memory range for
> each boards.
> 
> Signed-off-by: Neil Armstrong <narmstrong at baylibre.com>
> ---
>  arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi |  2 +-
>  arch/arm64/boot/dts/amlogic/meson-gx.dtsi           | 21 +++++++++++++++++++++
>  .../boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts     |  2 +-
>  arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts |  2 +-
>  arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi    |  2 +-
>  .../boot/dts/amlogic/meson-gxbb-vega-s95-meta.dts   |  2 +-
>  .../boot/dts/amlogic/meson-gxbb-vega-s95-pro.dts    |  2 +-
>  .../boot/dts/amlogic/meson-gxbb-vega-s95-telos.dts  |  2 +-
>  .../boot/dts/amlogic/meson-gxl-nexbox-a95x.dts      |  2 +-
>  .../arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts |  2 +-
>  arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts |  2 +-
>  11 files changed, 31 insertions(+), 10 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi
> index 7a078be..ac40b2d 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi
> @@ -56,7 +56,7 @@
>  
>  	memory at 0 {
>  		device_type = "memory";
> -		reg = <0x0 0x0 0x0 0x80000000>;
> +		reg = <0x0 0x1000000 0x0 0x7f000000>;
>  	};
>  
>  	vddio_boot: regulator-vddio_boot {
> diff --git a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
> index fc033c0..e085588 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
> @@ -55,6 +55,27 @@
>  	#address-cells = <2>;
>  	#size-cells = <2>;
>  
> +	reserved-memory {
> +		#address-cells = <2>;
> +		#size-cells = <2>;
> +		ranges;
> +
> +		secos: secos {
> +			reg = <0x0 0x05300000 0x0 0x2000000>;
> +			no-map;
> +		};

Hello Neil,

In
https://github.com/hardkernel/linux/blob/odroidc2-3.14.y/arch/arm64/boot/dts/meson64_odroidc2.dts
the secos region does not exist. In linux-next I find no reference to
the secos label. Where is the consumer of the region defined?

> +
> +		pstore: pstore {
> +			reg = <0x0 0x07300000 0x0 0x100000>;
> +			no-map;
> +		};

In
https://github.com/hardkernel/linux/blob/odroidc2-3.14.y/arch/arm64/boot/dts/amlogic/gxbb_skt.dts
and other files pstore uses a different position
(reg = <0x0 0x20000000 0x0 0x100000>;).
Why are we moving this?
Should this region be marked
compatible = "ramoops"; ?
Cf. Documentation/devicetree/bindings/reserved-memory/ramoops.txt.

It would be nice if you could add a short description of each reserved
area to the commit message.

Regards

Heinrich Schuchardt

> +
> +		secmon: secmon {
> +			reg = <0x0 0x10000000 0x0 0x200000>;
> +			no-map;
> +		};
> +	};
> +
>  	cpus {
>  		#address-cells = <0x2>;
>  		#size-cells = <0x0>;





More information about the linux-amlogic mailing list