[PATCH v2 0/7] scpi: Add support for legacy SCPI protocol

Neil Armstrong narmstrong at baylibre.com
Thu Aug 25 06:18:31 PDT 2016


On 08/23/2016 01:46 PM, Neil Armstrong wrote:
> This patchset aims to support the legacy SCPI firmware implementation that was
> delivered as early technology preview for the JUNO platform.
> 
> Finally a stable, maintained and public implementation for the SCPI protocol
> has been upstreamed part of the JUNO support and it is the recommended way
> of implementing SCP communication on ARMv8 platforms.
> 
> The Amlogic GXBB platform is using this legacy protocol, as the RK3368 & RK3399
> platforms. This patchset will only add support for Amlogic GXBB SoC.
> 
> This patchset add support for the legacy protocol in the arm_scpi.c file,
> avoiding code duplication.
> 
> Last RFC discution tread can be found at : https://lkml.org/lkml/2016/8/9/210
> 
> The last patch depends on the "Platform MHU" dtsi patch.
> 
> Changes since v1 at : http://lkml.kernel.org/r/1471515066-3626-1-git-send-email-narmstrong@baylibre.com
>  - Dropped vendor_send_message and rockchip vendor mechanism patches
>  - Merged alternate functions into main functions using is_legacy boolean
>  - Added DT match table to set is_legacy to true
>  - Kept alternate scpi_ops structure for legacy
> 
> Neil Armstrong (7):
>   scpi: Add alternative legacy structures, functions and macros
>   scpi: Use legacy variants command index calling scpi_send_message
>   scpi: Add support for Legacy match table for Amlogic GXBB SoC
>   scpi: grow MAX_DVFS_OPPS to 16 entries
>   dt-bindings: Add support for Amlogic GXBB SCPI Interface
>   ARM64: dts: meson-gxbb: Add SRAM node
>   ARM64: dts: meson-gxbb: Add SCPI with cpufreq & sensors Nodes
> 
>  Documentation/devicetree/bindings/arm/arm,scpi.txt |   8 +-
>  arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi        |  45 ++++
>  drivers/firmware/arm_scpi.c                        | 279 +++++++++++++++++++--
>  3 files changed, 302 insertions(+), 30 deletions(-)
> 

Hi Sudeep,

Sorry but I posted this V2 before you had time to look at my previous v1 replies...

In this serie, I merged the scpi_send_message, but I must still evaluate how it's possible
to use the list to queue commands.

Here I used if(is_legacy) to stop duplicating functions, is this ok for you ?

Thanks,
Neil



More information about the linux-amlogic mailing list