[PATCH 03/13] scpi: Add legacy send, prepare and handle remote functions
Sudeep Holla
sudeep.holla at arm.com
Tue Aug 23 07:42:30 PDT 2016
On 23/08/16 09:15, Neil Armstrong wrote:
> On 08/19/2016 06:13 PM, Sudeep Holla wrote:
>>
>>
>> On 18/08/16 11:10, Neil Armstrong wrote:
>>> In order to support the legacy SCPI procotol, add specific message_send,
>>> prepare_tx and handle_remote functions since the legacy procotol
>>> do not support message queuing and does not store the command word in the
>>> tx_payload data.
>>>
>>> Signed-off-by: Neil Armstrong <narmstrong at baylibre.com>
>>> ---
>>> drivers/firmware/arm_scpi.c | 69 +++++++++++++++++++++++++++++++++++++++++++++
>>> 1 file changed, 69 insertions(+)
>>>
>>> diff --git a/drivers/firmware/arm_scpi.c b/drivers/firmware/arm_scpi.c
>>> index 0bb6134..50b1297 100644
>>> --- a/drivers/firmware/arm_scpi.c
>>> +++ b/drivers/firmware/arm_scpi.c
[..]
>>>
>>> +static void legacy_scpi_tx_prepare(struct mbox_client *c, void *__msg)
>>> +{
>>> + struct scpi_chan *ch =
>>> + container_of(c, struct scpi_chan, cl);
>>> +
>>> + if (ch->t->tx_buf && ch->t->tx_len)
>>> + memcpy_toio(ch->tx_payload, ch->t->tx_buf, ch->t->tx_len);
>>
>>
>> I see that you are not using the list. Any particular reason for that ?
>>
>> IMO, that *might* help to reuse more code, but I may be wrong. Let's see
>> Some commands like DVFS take more time compared to simple query type of
>> commands. Queuing does help there instead of blocking the channel until
>> the receipt of response.
>
> I'll like to use the list, but, the "cmd" value is not stored in the shared tx
> memory, so we cannot recover the original tranfer from reading the tx memory cmd.
>
Even in the current driver we read the mem->command and search the list
in scpi_process_cmd. Instead *(u32 *)msg gives the command value, no ?
> This is why I added a "struct scpi_xfer *t;" in the scpi_chan structure to store
> the current transfer.
>
I don't like that. I am trying to get rid of that.
1. list is not being used
2. scpi_xfer is stashed even though we have only one command in
progress at any time in your case.
>>
>>> +}
>>> +
>>> static int legacy_high_priority_cmds[] = {
>>> LEGACY_SCPI_CMD_GET_CSS_PWR_STATE,
>>> LEGACY_SCPI_CMD_CFG_PWR_STATE_STAT,
>>> @@ -434,6 +461,48 @@ static void put_scpi_xfer(struct scpi_xfer *t, struct scpi_chan *ch)
>>> mutex_unlock(&ch->xfers_lock);
>>> }
>>>
>>> +static int legacy_scpi_send_message(u8 cmd, void *tx_buf, unsigned int tx_len,
>>> + void *rx_buf, unsigned int rx_len)
>>> +{
>>> + int ret;
>>> + u8 chan;
>>> + struct scpi_xfer *msg;
>>> + struct scpi_chan *scpi_chan;
>>> +
>>> + chan = legacy_scpi_get_chan(cmd);
>>> + scpi_chan = scpi_info->channels + chan;
>>> +
>>> + msg = get_scpi_xfer(scpi_chan);
>>> + if (!msg)
>>> + return -ENOMEM;
>>> +
>>> + mutex_lock(&scpi_chan->xfers_lock);
>>> +
>>
>> May be you can copy msg->cmd to msg->slot and that may help to reuse
>> more code or worst-case keep them aligned.
>
> Yes, it could be. But since the msg is not reused bu the tx_prepare and handle_response,
> we can pass anything here.
IIUC, we should be able to handle it using msg pte in handle_remote_msg
> And for the rockchip case, we must pass an xfer unrelated pointer here since they need
> a specially crafted memory structure for the mailbox.
>
We can consider that when they upstream the driver. Let's not consider
it now.
>>
>>> + msg->cmd = PACK_LEGACY_SCPI_CMD(cmd, tx_len);
>>> + msg->tx_buf = tx_buf;
>>> + msg->tx_len = tx_len;
>>> + msg->rx_buf = rx_buf;
>>> + msg->rx_len = rx_len;
>>> + init_completion(&msg->done);
>>> + scpi_chan->t = msg;
>>> +
>>> + ret = mbox_send_message(scpi_chan->chan, &msg->cmd);
>>
>> If slot is initialized to cmd, then you can pass msg itself above.
>> Then you can evaluate how much this function deviates from
>> scpi_send_message and try to re-use.
>
> The function deviates quite a lot since the queing is not used.
>
You have not given me the reason for not using the list yet.
If the msg ptr is used in scpi_handle_remote_msg, you should be able to
make use of it.
>>
>>> + if (ret < 0)
>>> + goto out;
>>> +
>>> + if (!wait_for_completion_timeout(&msg->done, MAX_RX_TIMEOUT))
>>> + ret = -ETIMEDOUT;
>>> + else
>>> + /* first status word */
>>> + ret = msg->status;
>>> +out:
>>> + mutex_unlock(&scpi_chan->xfers_lock);
>>> +
>>> + put_scpi_xfer(msg, scpi_chan);
>>> + /* SCPI error codes > 0, translate them to Linux scale*/
>>> + return ret > 0 ? scpi_to_linux_errno(ret) : ret;
>>> +}
>>> +
>>> static int __scpi_send_message(u8 cmd, void *tx_buf, unsigned int tx_len,
>>> void *rx_buf, unsigned int rx_len, bool extn)
>>> {
>>>
>>
>> [Nit]: Not sure if we need this as a separate patch. It might just
>> generate warnings, anyways we can merge into one later.
>
> I'll prefer to have functionnaly separate patches for now to clarify the changes.
> I'll eventually merge them for the final apply if needed.
>
Ah OK, then fine.
--
Regards,
Sudeep
More information about the linux-amlogic
mailing list