[PATCH 02/13] scpi: Add alternative legacy structures and macros
Neil Armstrong
narmstrong at baylibre.com
Thu Aug 18 03:10:55 PDT 2016
In order to support the legacy SCPI protocol variant, add back the structures
and macros that varies against the final specification.
Signed-off-by: Neil Armstrong <narmstrong at baylibre.com>
---
I checked against Amlogic implementation documentation and on-device, the channel selection
via legacy_scpi_get_chan() is needed and fails without it.
The sender_id is not needed so it was dropped.
drivers/firmware/arm_scpi.c | 84 +++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 84 insertions(+)
diff --git a/drivers/firmware/arm_scpi.c b/drivers/firmware/arm_scpi.c
index 403783a..0bb6134 100644
--- a/drivers/firmware/arm_scpi.c
+++ b/drivers/firmware/arm_scpi.c
@@ -52,6 +52,8 @@
#define CMD_TOKEN_ID_MASK 0xff
#define CMD_DATA_SIZE_SHIFT 16
#define CMD_DATA_SIZE_MASK 0x1ff
+#define CMD_LEGACY_DATA_SIZE_SHIFT 20
+#define CMD_LEGACY_DATA_SIZE_MASK 0x1ff
#define PACK_SCPI_CMD(cmd_id, tx_sz) \
((((cmd_id) & CMD_ID_MASK) << CMD_ID_SHIFT) | \
(((tx_sz) & CMD_DATA_SIZE_MASK) << CMD_DATA_SIZE_SHIFT))
@@ -61,6 +63,9 @@
(((tx_sz) & CMD_DATA_SIZE_MASK) << CMD_DATA_SIZE_SHIFT))
#define ADD_SCPI_TOKEN(cmd, token) \
((cmd) |= (((token) & CMD_TOKEN_ID_MASK) << CMD_TOKEN_ID_SHIFT))
+#define PACK_LEGACY_SCPI_CMD(cmd_id, tx_sz) \
+ ((((cmd_id) & CMD_ID_MASK) << CMD_ID_SHIFT) | \
+ (((tx_sz) & CMD_LEGACY_DATA_SIZE_MASK) << CMD_LEGACY_DATA_SIZE_SHIFT))
#define CMD_SIZE(cmd) (((cmd) >> CMD_DATA_SIZE_SHIFT) & CMD_DATA_SIZE_MASK)
#define CMD_UNIQ_MASK (CMD_TOKEN_ID_MASK << CMD_TOKEN_ID_SHIFT | CMD_ID_MASK)
@@ -138,6 +143,42 @@ enum scpi_std_cmd {
SCPI_CMD_COUNT
};
+enum legacy_scpi_std_cmd {
+ LEGACY_SCPI_CMD_INVALID = 0x00,
+ LEGACY_SCPI_CMD_SCPI_READY = 0x01,
+ LEGACY_SCPI_CMD_SCPI_CAPABILITIES = 0x02,
+ LEGACY_SCPI_CMD_EVENT = 0x03,
+ LEGACY_SCPI_CMD_SET_CSS_PWR_STATE = 0x04,
+ LEGACY_SCPI_CMD_GET_CSS_PWR_STATE = 0x05,
+ LEGACY_SCPI_CMD_CFG_PWR_STATE_STAT = 0x06,
+ LEGACY_SCPI_CMD_GET_PWR_STATE_STAT = 0x07,
+ LEGACY_SCPI_CMD_SYS_PWR_STATE = 0x08,
+ LEGACY_SCPI_CMD_L2_READY = 0x09,
+ LEGACY_SCPI_CMD_SET_AP_TIMER = 0x0a,
+ LEGACY_SCPI_CMD_CANCEL_AP_TIME = 0x0b,
+ LEGACY_SCPI_CMD_DVFS_CAPABILITIES = 0x0c,
+ LEGACY_SCPI_CMD_GET_DVFS_INFO = 0x0d,
+ LEGACY_SCPI_CMD_SET_DVFS = 0x0e,
+ LEGACY_SCPI_CMD_GET_DVFS = 0x0f,
+ LEGACY_SCPI_CMD_GET_DVFS_STAT = 0x10,
+ LEGACY_SCPI_CMD_SET_RTC = 0x11,
+ LEGACY_SCPI_CMD_GET_RTC = 0x12,
+ LEGACY_SCPI_CMD_CLOCK_CAPABILITIES = 0x13,
+ LEGACY_SCPI_CMD_SET_CLOCK_INDEX = 0x14,
+ LEGACY_SCPI_CMD_SET_CLOCK_VALUE = 0x15,
+ LEGACY_SCPI_CMD_GET_CLOCK_VALUE = 0x16,
+ LEGACY_SCPI_CMD_PSU_CAPABILITIES = 0x17,
+ LEGACY_SCPI_CMD_SET_PSU = 0x18,
+ LEGACY_SCPI_CMD_GET_PSU = 0x19,
+ LEGACY_SCPI_CMD_SENSOR_CAPABILITIES = 0x1a,
+ LEGACY_SCPI_CMD_SENSOR_INFO = 0x1b,
+ LEGACY_SCPI_CMD_SENSOR_VALUE = 0x1c,
+ LEGACY_SCPI_CMD_SENSOR_CFG_PERIODIC = 0x1d,
+ LEGACY_SCPI_CMD_SENSOR_CFG_BOUNDS = 0x1e,
+ LEGACY_SCPI_CMD_SENSOR_ASYNC_VALUE = 0x1f,
+ LEGACY_SCPI_CMD_COUNT
+};
+
struct scpi_xfer {
u32 slot; /* has to be first element */
u32 cmd;
@@ -183,6 +224,11 @@ struct scpi_shared_mem {
u8 payload[0];
} __packed;
+struct legacy_scpi_shared_mem {
+ __le32 status;
+ u8 payload[0];
+} __packed;
+
struct scp_capabilities {
__le32 protocol_version;
__le32 event_version;
@@ -208,6 +254,12 @@ struct clk_set_value {
__le32 rate;
} __packed;
+struct legacy_clk_set_value {
+ __le32 rate;
+ __le16 id;
+ __le16 reserved;
+} __packed;
+
struct dvfs_info {
__le32 header;
struct {
@@ -237,6 +289,10 @@ struct sensor_value {
__le32 hi_val;
} __packed;
+struct legacy_sensor_value {
+ __le32 val;
+} __packed;
+
struct dev_pstate_set {
u16 dev_id;
u8 pstate;
@@ -328,6 +384,34 @@ static void scpi_tx_prepare(struct mbox_client *c, void *msg)
mem->command = cpu_to_le32(t->cmd);
}
+static int legacy_high_priority_cmds[] = {
+ LEGACY_SCPI_CMD_GET_CSS_PWR_STATE,
+ LEGACY_SCPI_CMD_CFG_PWR_STATE_STAT,
+ LEGACY_SCPI_CMD_GET_PWR_STATE_STAT,
+ LEGACY_SCPI_CMD_SET_DVFS,
+ LEGACY_SCPI_CMD_GET_DVFS,
+ LEGACY_SCPI_CMD_SET_RTC,
+ LEGACY_SCPI_CMD_GET_RTC,
+ LEGACY_SCPI_CMD_SET_CLOCK_INDEX,
+ LEGACY_SCPI_CMD_SET_CLOCK_VALUE,
+ LEGACY_SCPI_CMD_GET_CLOCK_VALUE,
+ LEGACY_SCPI_CMD_SET_PSU,
+ LEGACY_SCPI_CMD_GET_PSU,
+ LEGACY_SCPI_CMD_SENSOR_CFG_PERIODIC,
+ LEGACY_SCPI_CMD_SENSOR_CFG_BOUNDS,
+};
+
+static int legacy_scpi_get_chan(u8 cmd)
+{
+ int idx;
+
+ for (idx = 0; idx < ARRAY_SIZE(legacy_high_priority_cmds); idx++)
+ if (cmd == legacy_high_priority_cmds[idx])
+ return 1;
+
+ return 0;
+}
+
static struct scpi_xfer *get_scpi_xfer(struct scpi_chan *ch)
{
struct scpi_xfer *t;
--
1.9.1
More information about the linux-amlogic
mailing list