[PATCH v2 11/16] smb: client: let smbd_post_send_iter() respect the peers max_send_size and transmit all data

[David Howells]

From: Stefan Metzmacher <metze at samba.org>

We should not send smbdirect_data_transfer messages larger than
the negotiated max_send_size, typically 1364 bytes, which means
24 bytes of the smbdirect_data_transfer header + 1340 payload bytes.

This happened when doing an SMB2 write with more than 1340 bytes
(which is done inline as it's below rdma_readwrite_threshold).

It means the peer resets the connection.

When testing between cifs.ko and ksmbd.ko something like this
is logged:

client:

    CIFS: VFS: RDMA transport re-established
    siw: got TERMINATE. layer 1, type 2, code 2
    siw: got TERMINATE. layer 1, type 2, code 2
    siw: got TERMINATE. layer 1, type 2, code 2
    siw: got TERMINATE. layer 1, type 2, code 2
    siw: got TERMINATE. layer 1, type 2, code 2
    siw: got TERMINATE. layer 1, type 2, code 2
    siw: got TERMINATE. layer 1, type 2, code 2
    siw: got TERMINATE. layer 1, type 2, code 2
    siw: got TERMINATE. layer 1, type 2, code 2
    CIFS: VFS: \\carina Send error in SessSetup = -11
    smb2_reconnect: 12 callbacks suppressed
    CIFS: VFS: reconnect tcon failed rc = -11
    CIFS: VFS: reconnect tcon failed rc = -11
    CIFS: VFS: reconnect tcon failed rc = -11
    CIFS: VFS: SMB: Zero rsize calculated, using minimum value 65536

and:

    CIFS: VFS: RDMA transport re-established
    siw: got TERMINATE. layer 1, type 2, code 2
    CIFS: VFS: smbd_recv:1894 disconnected
    siw: got TERMINATE. layer 1, type 2, code 2

The ksmbd dmesg is showing things like:

    smb_direct: Recv error. status='local length error (1)' opcode=128
    smb_direct: disconnected
    smb_direct: Recv error. status='local length error (1)' opcode=128
    ksmbd: smb_direct: disconnected
    ksmbd: sock_read failed: -107

As smbd_post_send_iter() limits the transmitted number of bytes
we need loop over it in order to transmit the whole iter.

Cc: Steve French <sfrench at samba.org>
Cc: Tom Talpey <tom at talpey.com>
Cc: linux-cifs at vger.kernel.org
Cc: <stable+noautosel at kernel.org> # sp->max_send_size should be info->max_send_size in backports
Fixes: 3d78fe73fa12 ("cifs: Build the RDMA SGE list directly from an iterator")
Signed-off-by: Stefan Metzmacher <metze at samba.org>
Signed-off-by: David Howells <dhowells at redhat.com>
---
 fs/smb/client/smbdirect.c | 31 +++++++++++++++++++++++++++----
 1 file changed, 27 insertions(+), 4 deletions(-)

diff --git a/fs/smb/client/smbdirect.c b/fs/smb/client/smbdirect.c
index cbc85bca006f..a976bcf61226 100644
--- a/fs/smb/client/smbdirect.c
+++ b/fs/smb/client/smbdirect.c
@@ -907,8 +907,10 @@ static int smbd_post_send_iter(struct smbd_connection *info,
 			.local_dma_lkey	= sc->ib.pd->local_dma_lkey,
 			.direction	= DMA_TO_DEVICE,
 		};
+		size_t payload_len = umin(*_remaining_data_length,
+					  sp->max_send_size - sizeof(*packet));
 
-		rc = smb_extract_iter_to_rdma(iter, *_remaining_data_length,
+		rc = smb_extract_iter_to_rdma(iter, payload_len,
 					      &extract);
 		if (rc < 0)
 			goto err_dma;
@@ -1013,6 +1015,27 @@ static int smbd_post_send_empty(struct smbd_connection *info)
 	return smbd_post_send_iter(info, NULL, &remaining_data_length);
 }
 
+static int smbd_post_send_full_iter(struct smbd_connection *info,
+				    struct iov_iter *iter,
+				    int *_remaining_data_length)
+{
+	int rc = 0;
+
+	/*
+	 * smbd_post_send_iter() respects the
+	 * negotiated max_send_size, so we need to
+	 * loop until the full iter is posted
+	 */
+
+	while (iov_iter_count(iter) > 0) {
+		rc = smbd_post_send_iter(info, iter, _remaining_data_length);
+		if (rc < 0)
+			break;
+	}
+
+	return rc;
+}
+
 /*
  * Post a receive request to the transport
  * The remote peer can only send data when a receive request is posted
@@ -2032,14 +2055,14 @@ int smbd_send(struct TCP_Server_Info *server,
 			klen += rqst->rq_iov[i].iov_len;
 		iov_iter_kvec(&iter, ITER_SOURCE, rqst->rq_iov, rqst->rq_nvec, klen);
 
-		rc = smbd_post_send_iter(info, &iter, &remaining_data_length);
+		rc = smbd_post_send_full_iter(info, &iter, &remaining_data_length);
 		if (rc < 0)
 			break;
 
 		if (iov_iter_count(&rqst->rq_iter) > 0) {
 			/* And then the data pages if there are any */
-			rc = smbd_post_send_iter(info, &rqst->rq_iter,
-						 &remaining_data_length);
+			rc = smbd_post_send_full_iter(info, &rqst->rq_iter,
+						      &remaining_data_length);
 			if (rc < 0)
 				break;
 		}