[PATCH 6/6] clk: actions: Add NIC and ETHERNET clock support for Actions S500 SoC

Manivannan Sadhasivam manivannan.sadhasivam at linaro.org
Mon Mar 15 22:52:52 PDT 2021


On Mon, Mar 08, 2021 at 07:18:31PM +0200, Cristian Ciocaltea wrote:
> Add support for the missing NIC and ETHERNET clocks in the Actions Semi
> Owl S500 SoC clock driver.
> 
> Additionally, change APB clock parent from AHB to the newly added NIC.
> 
> Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea at gmail.com>
> ---
>  drivers/clk/actions/owl-s500.c | 17 ++++++++++++++++-
>  1 file changed, 16 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/clk/actions/owl-s500.c b/drivers/clk/actions/owl-s500.c
> index b9e434173b4f..0ccc9619b302 100644
> --- a/drivers/clk/actions/owl-s500.c
> +++ b/drivers/clk/actions/owl-s500.c
> @@ -112,6 +112,7 @@ static const char * const bisp_clk_mux_p[] = { "display_pll_clk", "dev_clk" };
>  static const char * const sensor_clk_mux_p[] = { "hosc", "bisp_clk" };
>  static const char * const sd_clk_mux_p[] = { "dev_clk", "nand_pll_clk" };
>  static const char * const pwm_clk_mux_p[] = { "losc", "hosc" };
> +static const char * const nic_clk_mux_p[] = { "dev_clk", "display_pll_clk", "nand_pll_clk", "ddr_pll_clk" };

As per the reg field order, this should come after "ahbprediv_clk_mux_p"

Rest looks good.

Thanks,
Mani

>  static const char * const ahbprediv_clk_mux_p[] = { "dev_clk", "display_pll_clk", "nand_pll_clk", "ddr_pll_clk" };
>  static const char * const uart_clk_mux_p[] = { "hosc", "dev_pll_clk" };
>  static const char * const de_clk_mux_p[] = { "display_pll_clk", "dev_clk" };
> @@ -197,7 +198,7 @@ static OWL_GATE(hdmi_clk, "hdmi_clk", "hosc", CMU_DEVCLKEN1, 3, 0, 0);
>  
>  /* divider clocks */
>  static OWL_DIVIDER(h_clk, "h_clk", "ahbprediv_clk", CMU_BUSCLK1, 2, 2, h_div_table, 0, 0);
> -static OWL_DIVIDER(apb_clk, "apb_clk", "ahb_clk", CMU_BUSCLK1, 14, 2, NULL, 0, 0);
> +static OWL_DIVIDER(apb_clk, "apb_clk", "nic_clk", CMU_BUSCLK1, 14, 2, NULL, 0, 0);
>  static OWL_DIVIDER(rmii_ref_clk, "rmii_ref_clk", "ethernet_pll_clk", CMU_ETHERNETPLL, 1, 1, rmii_ref_div_table, 0, 0);
>  
>  /* factor clocks */
> @@ -205,6 +206,12 @@ static OWL_FACTOR(de1_clk, "de_clk1", "de_clk", CMU_DECLK, 0, 4, de_factor_table
>  static OWL_FACTOR(de2_clk, "de_clk2", "de_clk", CMU_DECLK, 4, 4, de_factor_table, 0, 0);
>  
>  /* composite clocks */
> +static OWL_COMP_DIV(nic_clk, "nic_clk", nic_clk_mux_p,
> +			OWL_MUX_HW(CMU_BUSCLK1, 4, 3),
> +			{ 0 },
> +			OWL_DIVIDER_HW(CMU_BUSCLK1, 16, 2, 0, NULL),
> +			0);
> +
>  static OWL_COMP_DIV(ahbprediv_clk, "ahbprediv_clk", ahbprediv_clk_mux_p,
>  			OWL_MUX_HW(CMU_BUSCLK1, 8, 3),
>  			{ 0 },
> @@ -320,6 +327,10 @@ static OWL_COMP_FIXED_FACTOR(i2c3_clk, "i2c3_clk", "ethernet_pll_clk",
>  			OWL_GATE_HW(CMU_DEVCLKEN1, 31, 0),
>  			1, 5, 0);
>  
> +static OWL_COMP_FIXED_FACTOR(ethernet_clk, "ethernet_clk", "ethernet_pll_clk",
> +			OWL_GATE_HW(CMU_DEVCLKEN1, 22, 0),
> +			1, 20, 0);
> +
>  static OWL_COMP_DIV(uart0_clk, "uart0_clk", uart_clk_mux_p,
>  			OWL_MUX_HW(CMU_UART0CLK, 16, 1),
>  			OWL_GATE_HW(CMU_DEVCLKEN1, 6, 0),
> @@ -454,6 +465,8 @@ static struct owl_clk_common *s500_clks[] = {
>  	&apb_clk.common,
>  	&dmac_clk.common,
>  	&gpio_clk.common,
> +	&nic_clk.common,
> +	&ethernet_clk.common,
>  };
>  
>  static struct clk_hw_onecell_data s500_hw_clks = {
> @@ -513,6 +526,8 @@ static struct clk_hw_onecell_data s500_hw_clks = {
>  		[CLK_APB]		= &apb_clk.common.hw,
>  		[CLK_DMAC]		= &dmac_clk.common.hw,
>  		[CLK_GPIO]		= &gpio_clk.common.hw,
> +		[CLK_NIC]		= &nic_clk.common.hw,
> +		[CLK_ETHERNET]		= &ethernet_clk.common.hw,
>  	},
>  	.num = CLK_NR_CLKS,
>  };
> -- 
> 2.30.1
> 



More information about the linux-actions mailing list