[PATCH v2 13/18] arm: dts: owl-s500: Add I2C support

[Manivannan Sadhasivam]

On Fri, Nov 20, 2020 at 01:56:07AM +0200, Cristian Ciocaltea wrote:
> Add I2C controller nodes for Actions Semi S500 SoC.
> 
> Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea at gmail.com>

Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam at linaro.org>

Thanks,
Mani

> ---
>  arch/arm/boot/dts/owl-s500.dtsi | 40 +++++++++++++++++++++++++++++++++
>  1 file changed, 40 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/owl-s500.dtsi b/arch/arm/boot/dts/owl-s500.dtsi
> index 7af7c9e1119d..55f8b8c2e149 100644
> --- a/arch/arm/boot/dts/owl-s500.dtsi
> +++ b/arch/arm/boot/dts/owl-s500.dtsi
> @@ -193,6 +193,46 @@ cmu: clock-controller at b0160000 {
>  			#reset-cells = <1>;
>  		};
>  
> +		i2c0: i2c at b0170000 {
> +			compatible = "actions,s500-i2c";
> +			reg = <0xb0170000 0x4000>;
> +			clocks = <&cmu CLK_I2C0>;
> +			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			status = "disabled";
> +		};
> +
> +		i2c1: i2c at b0174000 {
> +			compatible = "actions,s500-i2c";
> +			reg = <0xb0174000 0x4000>;
> +			clocks = <&cmu CLK_I2C1>;
> +			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			status = "disabled";
> +		};
> +
> +		i2c2: i2c at b0178000 {
> +			compatible = "actions,s500-i2c";
> +			reg = <0xb0178000 0x4000>;
> +			clocks = <&cmu CLK_I2C2>;
> +			interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			status = "disabled";
> +		};
> +
> +		i2c3: i2c at b017c000 {
> +			compatible = "actions,s500-i2c";
> +			reg = <0xb017c000 0x4000>;
> +			clocks = <&cmu CLK_I2C3>;
> +			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			status = "disabled";
> +		};
> +
>  		timer: timer at b0168000 {
>  			compatible = "actions,s500-timer";
>  			reg = <0xb0168000 0x8000>;
> -- 
> 2.29.2
>