Greetings.<div><br></div><div>I have been trying to set up the libertas_spi driver for the 8686 on the cm-x270, with kernel 2.6.35.5 with no success. I have compiled it as module, but at boot time it complains:</div><div><br>
</div><div><div>pxa2xx-spi pxa2xx-spi.2: registered master spi2</div><div>spi spi2.0: 13000000 Hz actual, DMA</div><div>spi spi2.0: setup mode 0, 8 bits/w, 13000000 Hz max --> 0</div><div>pxa2xx-spi pxa2xx-spi.2: registered child spi2.0</div>
<div>libertas_spi: Libertas SPI driver</div><div>libertas_spi spi2.0: 13000000 Hz actual, DMA</div><div>libertas_spi spi2.0: setup mode 0, 16 bits/w, 13000000 Hz max --> 0</div><div>libertas: Can't read bus mode register.</div>
<div>libertas_spi: probe of spi2.0 failed with error -5</div><div><br></div><div>And after issuing:</div><div> </div><div> ~# modprobe -r libertas_spi</div><div> ~# modprobe libertas_spi</div><div><br></div>
<div>I get:</div><div><br></div><div>libertas_spi: Libertas SPI driver</div><div>gpio_request: gpio-19 (WLAN STRAP) status -16</div>
<div>libertas_spi: probe of spi2.0 failed with error -16</div></div><div><br></div><div>Has anyone got this kind of errors or could point me in the right direction as how to get it fixed? I am no kernel developer, but won't mind looking into it as much as needed. For further info, i attached my dmesg and kernel config.</div>
<div><br></div><div>Thanks.</div><div>Pablo.</div>