continous transmit mode

[John Rhodes]

Hi Dakshayini,

Continuous transmit mode is used for FCC testing where the radio is put into a state of a continuous tone at a certain frequency.  This can be setup via a specific script that writes to the appropriate 8686 registers.  Let me know if you need the scripts for setting this up.

John

________________________________
From: libertas-dev-bounces at lists.infradead.org [mailto:libertas-dev-bounces at lists.infradead.org] On Behalf Of Dakshayini A
Sent: Tuesday, January 03, 2012 11:31 PM
To: libertas-dev at lists.infradead.org
Subject: continous transmit mode

Hi all,

I  am using libertas driver (SDIO 8686 chip )  for wireless interface and wanted to know what does continous transmit mode and monitor mode mean and how  to operate libertas driver  in continous mode  .For certification we need to  opertate in continous mode . I couldnt find any proper details regarding this modes.
If anybody can give details about those mode will be very helpful.

Thanks
Dakshayini


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.infradead.org/pipermail/libertas-dev/attachments/20120110/c51595a9/attachment-0001.html>