looking for consultant

[Eric Diethorn]

Hi Henry,

We were able to get firmware and some source from wi2wi, so we have made
some progress. However, the code does not appear to be compatible with
newer releases of linux.

Eric

---
Eric Diethorn
mh acoustics LLC






On 12/3/12 2:01 PM, "hong zhang" <henryzhang62 at yahoo.com> wrote:

>Eric,
>
>I do not think Marvell will provide source codes of firmware.
>User should not be allowed to change TX power by law.
>
>
>---henry
>
>
>--- On Thu, 11/29/12, Eric Diethorn <ejd at mhacoustics.com> wrote:
>
>> From: Eric Diethorn <ejd at mhacoustics.com>
>> Subject: looking for consultant
>> To: libertas-dev at lists.infradead.org
>> Date: Thursday, November 29, 2012, 7:56 PM
>> Hello libertas Community,
>> 
>> I am looking for a consultant who can assist us with
>> modifications to the
>> liberates_sdio driver and firmware to provide RF power
>> control and
>> monitoring. I'd like to use the tools iwconfig or iw to
>> control transmit
>> power level (txpower), which does not seem to be supported
>> at the moment
>> but once was, but I'd also like to consider modifying the
>> adaptive power
>> control mechanism (auto). I am developing on the Gumstix
>> Overo IronSTORM,
>> using linux 3.2 and the standard libertas_sdio driver and
>> firmware for the
>> wi2wi module.
>> 
>> Thanks,
>> 
>> Eric Diethorn
>> ejd at mhacoustics.com
>> 
>> ---
>> Eric Diethorn
>> mh acoustics LLC
>> 
>> 
>> 
>> _______________________________________________
>> libertas-dev mailing list
>> libertas-dev at lists.infradead.org
>> http://lists.infradead.org/mailman/listinfo/libertas-dev
>>