[PATCH 4/5] libertas SDIO: convert to asynchronous firmware loading
Daniel Drake
dsd at laptop.org
Mon Apr 16 18:53:43 EDT 2012
Signed-off-by: Daniel Drake <dsd at laptop.org>
Acked-by: Dan Williams <dcbw at redhat.com>
---
drivers/net/wireless/libertas/if_sdio.c | 206 ++++++++++++++++++-------------
1 files changed, 121 insertions(+), 85 deletions(-)
diff --git a/drivers/net/wireless/libertas/if_sdio.c b/drivers/net/wireless/libertas/if_sdio.c
index 6590feb..76caeba 100644
--- a/drivers/net/wireless/libertas/if_sdio.c
+++ b/drivers/net/wireless/libertas/if_sdio.c
@@ -117,6 +117,8 @@ struct if_sdio_card {
int model;
unsigned long ioport;
unsigned int scratch_reg;
+ bool started;
+ wait_queue_head_t pwron_waitq;
u8 buffer[65536] __attribute__((aligned(4)));
@@ -129,6 +131,9 @@ struct if_sdio_card {
u8 rx_unit;
};
+static void if_sdio_finish_power_on(struct if_sdio_card *card);
+static int if_sdio_power_off(struct if_sdio_card *card);
+
/********************************************************************/
/* I/O */
/********************************************************************/
@@ -669,12 +674,39 @@ out:
return ret;
}
+static void if_sdio_do_prog_firmware(struct lbs_private *priv, int ret,
+ const struct firmware *helper,
+ const struct firmware *mainfw)
+{
+ struct if_sdio_card *card = priv->card;
+
+ if (ret) {
+ pr_err("failed to find firmware (%d)\n", ret);
+ return;
+ }
+
+ ret = if_sdio_prog_helper(card, helper);
+ if (ret)
+ goto out;
+
+ lbs_deb_sdio("Helper firmware loaded\n");
+
+ ret = if_sdio_prog_real(card, mainfw);
+ if (ret)
+ goto out;
+
+ lbs_deb_sdio("Firmware loaded\n");
+ if_sdio_finish_power_on(card);
+
+out:
+ release_firmware(helper);
+ release_firmware(mainfw);
+}
+
static int if_sdio_prog_firmware(struct if_sdio_card *card)
{
int ret;
u16 scratch;
- const struct firmware *helper = NULL;
- const struct firmware *mainfw = NULL;
lbs_deb_enter(LBS_DEB_SDIO);
@@ -708,41 +740,18 @@ static int if_sdio_prog_firmware(struct if_sdio_card *card)
*/
if (scratch == IF_SDIO_FIRMWARE_OK) {
lbs_deb_sdio("firmware already loaded\n");
- goto success;
+ if_sdio_finish_power_on(card);
+ return 0;
} else if ((card->model == MODEL_8686) && (scratch & 0x7fff)) {
lbs_deb_sdio("firmware may be running\n");
- goto success;
- }
-
- ret = lbs_get_firmware(&card->func->dev, card->model, &fw_table[0],
- &helper, &mainfw);
- if (ret) {
- pr_err("failed to find firmware (%d)\n", ret);
- goto out;
+ if_sdio_finish_power_on(card);
+ return 0;
}
- ret = if_sdio_prog_helper(card, helper);
- if (ret)
- goto out;
-
- lbs_deb_sdio("Helper firmware loaded\n");
-
- ret = if_sdio_prog_real(card, mainfw);
- if (ret)
- goto out;
-
- lbs_deb_sdio("Firmware loaded\n");
-
-success:
- sdio_claim_host(card->func);
- sdio_set_block_size(card->func, IF_SDIO_BLOCK_SIZE);
- sdio_release_host(card->func);
- ret = 0;
+ ret = lbs_get_firmware_async(card->priv, &card->func->dev, card->model,
+ fw_table, if_sdio_do_prog_firmware);
out:
- release_firmware(helper);
- release_firmware(mainfw);
-
lbs_deb_leave_args(LBS_DEB_SDIO, "ret %d", ret);
return ret;
}
@@ -751,55 +760,15 @@ out:
/* Power management */
/********************************************************************/
-static int if_sdio_power_on(struct if_sdio_card *card)
+/* Finish power on sequence (after firmware is loaded) */
+static void if_sdio_finish_power_on(struct if_sdio_card *card)
{
struct sdio_func *func = card->func;
struct lbs_private *priv = card->priv;
- struct mmc_host *host = func->card->host;
int ret;
sdio_claim_host(func);
-
- ret = sdio_enable_func(func);
- if (ret)
- goto release;
-
- /* For 1-bit transfers to the 8686 model, we need to enable the
- * interrupt flag in the CCCR register. Set the MMC_QUIRK_LENIENT_FN0
- * bit to allow access to non-vendor registers. */
- if ((card->model == MODEL_8686) &&
- (host->caps & MMC_CAP_SDIO_IRQ) &&
- (host->ios.bus_width == MMC_BUS_WIDTH_1)) {
- u8 reg;
-
- func->card->quirks |= MMC_QUIRK_LENIENT_FN0;
- reg = sdio_f0_readb(func, SDIO_CCCR_IF, &ret);
- if (ret)
- goto disable;
-
- reg |= SDIO_BUS_ECSI;
- sdio_f0_writeb(func, reg, SDIO_CCCR_IF, &ret);
- if (ret)
- goto disable;
- }
-
- card->ioport = sdio_readb(func, IF_SDIO_IOPORT, &ret);
- if (ret)
- goto disable;
-
- card->ioport |= sdio_readb(func, IF_SDIO_IOPORT + 1, &ret) << 8;
- if (ret)
- goto disable;
-
- card->ioport |= sdio_readb(func, IF_SDIO_IOPORT + 2, &ret) << 16;
- if (ret)
- goto disable;
-
- sdio_release_host(func);
- ret = if_sdio_prog_firmware(card);
- sdio_claim_host(func);
- if (ret)
- goto disable;
+ sdio_set_block_size(card->func, IF_SDIO_BLOCK_SIZE);
/*
* Get rx_unit if the chip is SD8688 or newer.
@@ -824,7 +793,7 @@ static int if_sdio_power_on(struct if_sdio_card *card)
*/
ret = sdio_claim_irq(func, if_sdio_interrupt);
if (ret)
- goto disable;
+ goto release;
/*
* Enable interrupts now that everything is set up
@@ -850,11 +819,79 @@ static int if_sdio_power_on(struct if_sdio_card *card)
}
priv->fw_ready = 1;
+ wake_up(&card->pwron_waitq);
- return 0;
+ if (!card->started) {
+ ret = lbs_start_card(priv);
+ if_sdio_power_off(card);
+ if (ret == 0) {
+ card->started = true;
+ /* Tell PM core that we don't need the card to be
+ * powered now */
+ pm_runtime_put_noidle(&func->dev);
+ }
+ }
+
+ return;
release_irq:
sdio_release_irq(func);
+release:
+ sdio_release_host(func);
+}
+
+static int if_sdio_power_on(struct if_sdio_card *card)
+{
+ struct sdio_func *func = card->func;
+ struct mmc_host *host = func->card->host;
+ int ret;
+
+ sdio_claim_host(func);
+
+ ret = sdio_enable_func(func);
+ if (ret)
+ goto release;
+
+ /* For 1-bit transfers to the 8686 model, we need to enable the
+ * interrupt flag in the CCCR register. Set the MMC_QUIRK_LENIENT_FN0
+ * bit to allow access to non-vendor registers. */
+ if ((card->model == MODEL_8686) &&
+ (host->caps & MMC_CAP_SDIO_IRQ) &&
+ (host->ios.bus_width == MMC_BUS_WIDTH_1)) {
+ u8 reg;
+
+ func->card->quirks |= MMC_QUIRK_LENIENT_FN0;
+ reg = sdio_f0_readb(func, SDIO_CCCR_IF, &ret);
+ if (ret)
+ goto disable;
+
+ reg |= SDIO_BUS_ECSI;
+ sdio_f0_writeb(func, reg, SDIO_CCCR_IF, &ret);
+ if (ret)
+ goto disable;
+ }
+
+ card->ioport = sdio_readb(func, IF_SDIO_IOPORT, &ret);
+ if (ret)
+ goto disable;
+
+ card->ioport |= sdio_readb(func, IF_SDIO_IOPORT + 1, &ret) << 8;
+ if (ret)
+ goto disable;
+
+ card->ioport |= sdio_readb(func, IF_SDIO_IOPORT + 2, &ret) << 16;
+ if (ret)
+ goto disable;
+
+ sdio_release_host(func);
+ ret = if_sdio_prog_firmware(card);
+ if (ret) {
+ sdio_disable_func(func);
+ return ret;
+ }
+
+ return 0;
+
disable:
sdio_disable_func(func);
release:
@@ -1061,11 +1098,17 @@ static int if_sdio_power_save(struct lbs_private *priv)
static int if_sdio_power_restore(struct lbs_private *priv)
{
struct if_sdio_card *card = priv->card;
+ int r;
/* Make sure the card will not be powered off by runtime PM */
pm_runtime_get_sync(&card->func->dev);
- return if_sdio_power_on(card);
+ r = if_sdio_power_on(card);
+ if (r)
+ return r;
+
+ wait_event(card->pwron_waitq, priv->fw_ready);
+ return 0;
}
@@ -1166,6 +1209,7 @@ static int if_sdio_probe(struct sdio_func *func,
spin_lock_init(&card->lock);
card->workqueue = create_workqueue("libertas_sdio");
INIT_WORK(&card->packet_worker, if_sdio_host_to_card_worker);
+ init_waitqueue_head(&card->pwron_waitq);
/* Check if we support this card */
for (i = 0; i < ARRAY_SIZE(fw_table); i++) {
@@ -1207,14 +1251,6 @@ static int if_sdio_probe(struct sdio_func *func,
if (ret)
goto err_activate_card;
- ret = lbs_start_card(priv);
- if_sdio_power_off(card);
- if (ret)
- goto err_activate_card;
-
- /* Tell PM core that we don't need the card to be powered now */
- pm_runtime_put_noidle(&func->dev);
-
out:
lbs_deb_leave_args(LBS_DEB_SDIO, "ret %d", ret);
--
1.7.7.6
More information about the libertas-dev
mailing list