Broadcasting using Marvell 88W8686 Linux Driver

[Amyuni Development Team]

Hello,

We need to know if there is a command to broadcast continuous modulated
waveform using the libertas driver for Marvell 88W8686 (SDIO driver.) The
broadcast is used in test laboratories to obtain FCC certification on any
product that contains this WiFi chip. The idea is to continuously broadcast
a constant signal on a given channel and measure the results using spectrum
analyzers.

We tried using the Linux netcat command to do a broadcast, but this gave us
only an approximation of the required signal which must be perfectly
continuous.

Thank you for your help.

Amyuni Dev. Team