Problem with Marvell SD8686 with Linux-2.6.29

[Alberto Panizzo]

Hi Ivan,
Please, do not top-post..
2010/10/12 Ivan Li <lijinlei1 at 163.com>:
> Hi Alberto,
>
> Thanks for your reply.
>
> Interface: SDIO
> FW: 9.70.15p0
>
> Below is the log when I insert the module:
> root at onyx ~$ modprobe libertas_sdio
> lib80211: common routines for IEEE802.11 drivers
> libertas_sdio: Libertas SDIO driver
> libertas_sdio: Copyright Pierre Ossman
> libertas_sdio mmc1:0001:1: firmware: requesting sd8686_helper.bin
> libertas_sdio mmc1:0001:1: firmware: requesting sd8686.bin
> libertas: 00:27:13:e2:bd:30, fw 9.70.15p0, cap 0x00000303
> libertas: PREP_CMD: command 0x00a3 failed: 2
> libertas: PREP_CMD: command 0x00a3 failed: 2
> libertas: eth0: Marvell WLAN 802.11 adapter
>
It seems that you are stucked with the Mesh initialization..
Do you need this feature?
While the advice is still upgrade the kernel, you can disable the mesh
support in:
-> Device Drivers
 -> Network device support (NETDEVICES)
  -> Wireless LAN (WLAN)
   -> Marvell 8xxx Libertas WLAN driver support (LIBERTAS)
    -> LIBERTAS_MESH [=n]

-- 
Alberto!

        Be Persistent!
                - Greg Kroah-Hartman (FOSDEM 2010)