Problem with Marvell SD8686 with Linux-2.6.29

[Alberto Panizzo]

On sab, 2010-10-09 at 12:16 +0200, Marek Vasut wrote:
> Dne So 9. října 2010 10:32:52 Ivan Li napsal(a):
> > Hi guys,
> > 
> > I am using Marvell sd8686 on Marvell pxa168 platform.
> > I can't associate with AP, but I can get AP list with "iwlist eth0 scan".
> > 
> > detailed log lists below.
> > 
> > Working env:
> > 1. Linux-2.6.29
> > 2. Marvell pxa168 with sd8686
> > 
> > And I remember I successfully get marvell sd8686 work on Freescale i.MX31
> > with Linux-2.6.29.
> 
> Hi, such kernel is way too outdated. The Marvell pxa168 is well supported in 
> mainline linux kernel ... can you try that ?
> 
> Cheers

Anyway, your log seems to tell about misconfiguration of the interface 
CPU/Wifi chip because of too many timeouts.
Are you sure about pin configurations? (function/Signal strength).

You didn't tell us what interface are you using and what firmware
version you are loading.

Cheers
Alberto!

> 
> > 
> > root at onyx ~$ wpa_supplicant -Dwext -ieth0 -c/etc/wpa.conf
> > CTRL-EVENT-SCAN-RESULTS
> > Trying to associate with 00:22:b0:9b:2d:ad (SSID='tiger' freq=2437 MHz)
> > Association request to the driver failed
> > Associated with 00:22:b0:9b:2d:ad
> > Authentication with 00:22:b0:9b:2d:ad timed out.
> > ioctl[SIOCSIWMLME]: Operation not supported
> > libertas: command 0x0006 timed out
> > libertas: requeueing command 0x0006 due to timeout (#1)
> > WPA: 4-Way Handshake failed - pre-shared key may be incorrect
> > CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys
> > libertas: command 0x0006 timed out
> > libertas: requeueing command 0x0006 due to timeout (#2)
> > libertas: Invalid CMD_RESP 6 to command 6!
> > Authentication with 00:00:00:00:00:00 timed out.
> > libertas: command 0x0006 timed out
> > libertas: requeueing command 0x0006 due to timeout (#3)
> > libertas: Invalid CMD_RESP 6 to command 6!
> > libertas: command 0x0006 timed out
> > libertas: Excessive timeouts submitting command 0x0006
> > libertas: PREP_CMD: command 0x0006 failed: -110
> > libertas: SCAN_CMD failed
> > libertas: Received CMD_RESP with invalid sequence 34 (expected 35)
> > libertas: command 0x0013 timed out
> > libertas: requeueing command 0x0013 due to timeout (#1)
> > libertas: Received result 0 to command 13 after 1 retries
> > libertas: Received CMD_RESP with invalid sequence 35 (expected 36)
> > libertas: command 0x0028 timed out
> > libertas: requeueing command 0x0028 due to timeout (#1)
> > libertas: Received result 0 to command 28 after 1 retries
> > libertas: Received CMD_RESP with invalid sequence 36 (expected 37)
> > libertas: command 0x0028 timed out
> > libertas: requeueing command 0x0028 due to timeout (#1)
> > libertas: Received result 0 to command 28 after 1 retries
> > libertas: Received CMD_RESP with invalid sequence 37 (expected 38)
> > libertas: command 0x002f timed out
> > libertas: requeueing command 0x002f due to timeout (#1)
> > libertas: Received result 0 to command 2f after 1 retries
> > libertas: Received CMD_RESP with invalid sequence 38 (expected 39)
> > libertas: command 0x005e timed out
> > libertas: requeueing command 0x005e due to timeout (#1)
> > libertas: Received result 0 to command 5e after 1 retries
> > libertas: Received CMD_RESP with invalid sequence 39 (expected 40)
> > libertas: command 0x005e timed out
> > libertas: requeueing command 0x005e due to timeout (#1)
> > libertas: Received result 0 to command 5e after 1 retries
> > libertas: Received CMD_RESP with invalid sequence 40 (expected 41)
> > CTRL-EVENT-SCAN-RESULTS
> > _______________________________________________
> > libertas-dev mailing list
> > libertas-dev at lists.infradead.org
> > http://lists.infradead.org/mailman/listinfo/libertas-dev
> 
> _______________________________________________
> libertas-dev mailing list
> libertas-dev at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/libertas-dev