Marvell W8686 chipset Blackfin problem

[Jonathan dumaresq]

Dan Williams wrote:
> On Thu, 2010-07-22 at 09:46 -0400, Jonathan dumaresq wrote:
>> libertas-dev-bounces at lists.infradead.org wrote:
>>> Hi all,
>>> 
>>> I have something semi-working. I have change the SPI_MODE3 to
>>> SPI_MOD0 and now I get the module connect to the libertas_spi.
>> 
>>> 
>>> When I attemp th eload the module, I got this output:
>>> 
>>> root:/> modprobe libertas_spi
>>> libertas_spi: Libertas SPI driver
>>> libertas_spi spi0.18: firmware: requesting libertas/gspi8686_hlp.bin
>>> libertas_spi spi0.18: firmware: requesting libertas/gspi8686.bin
>>> libertas: spu_wait_for_u16: timeout with val=00, target_mask=00,
>>> target=00 libertas: if_spi_prog_main_firmware: timed out waiting
>>> for initial scratch reg = 0 libertas: failed to load firmware
>>> (err=-110) 
>>> libertas_spi: probe of spi0.18 failed with error -110
>> 
>> I found it. I had use the cozibit firmware and everything worked. I
>> have no idea why, but now everything is working.
> 
> So which firmware are you using now that works?  The gspi firmware
> from the linux-firmware git tree are ones I pulled off Marvell's
> Extranet a while back and AFAIK are working but I don't have SPI
> hardware to test with (only CF, USB, and SDIO).   
> 
> Dan

Hi,
I have used the one from cozybit there

http://cozybit.com/projects/gspi8686/

Regards

Jonathan