[BUG?] 8686 on at91rm9200: command timed out

[Manuel Stahl]

I have some problems getting a Marvell 8686 to work with an AT91RM9200 
board. The MCI driver is at91_mci, the SD card in slot A works, the 8686 
is in slot B. Kernel is 2.6.32.7 vanilla.

I get 'command 0x0003 timed out' errors after loading the firmware, 
though the MCI driver says it was successful (full log is attached):

mmc0: starting CMD53 arg 92000034 flags 000001b5
mmc0:     blksz 52 blocks 1 flags 00000100 tsac 1000 ms nsac 0
Sending command 53 as 00011075, arg = 92000034, blocks = 1, length = 52 
(MR = 00000301)
Transmitting 52 bytes
MCI irq: status = 00004045, C07F0001, 00000001
Command ready
MCI irq: status = 0000C0D5, C07F8008, 00008000
TX buffer empty
Handling the transmit
MCI irq: status = 0000C0ED, C07F0028, 00000028
Card is ready
-> bytes_xfered 0, total_length = 52
Block transfer has ended
Completed command
Status = 00000028/0000c0e5 [00002000 00000000 00000000 00000000]
mmc0: req done (CMD53): 0: 00002000 00000000 00000000 00000000
mmc0:     52 bytes transferred: 0
libertas: command 0x0003 timed out
libertas: requeueing command 0x0003 due to timeout (#1)

Is is a problem with the libertas driver or the at91_mci?

Regards,
-- 
Dipl.-Inf. Manuel Stahl
Fraunhofer-Institut für Integrierte Schaltungen IIS
- Leistungsoptimierte Systeme -
Nordostpark 93                Telefon  +49 (0)911/58061-6419
90411 Nürnberg                Fax      +49 (0)911/58061-6398
http://www.iis.fraunhofer.de  manuel.stahl at iis.fraunhofer.de




-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: at91_mci libertas.log
URL: <http://lists.infradead.org/pipermail/libertas-dev/attachments/20100215/480d6c01/attachment-0001.el>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: smime.p7s
Type: application/pkcs7-signature
Size: 6148 bytes
Desc: S/MIME Cryptographic Signature
URL: <http://lists.infradead.org/pipermail/libertas-dev/attachments/20100215/480d6c01/attachment-0001.p7s>