[PATCH 1/4] libertas: define macros for SDIO model numbers
Dan Williams
dcbw at redhat.com
Wed May 20 18:20:47 EDT 2009
On Tue, 2009-05-19 at 19:48 -0700, Bing Zhao wrote:
> replace direct usages of SDIO model numbers with defined macros.
>
> Signed-off-by: Bing Zhao <bzhao at marvell.com>
Acked-by: Dan Williams <dcbw at redhat.com>
> ---
> drivers/net/wireless/libertas/if_sdio.c | 18 +++++++++---------
> drivers/net/wireless/libertas/if_sdio.h | 4 ++++
> 2 files changed, 13 insertions(+), 9 deletions(-)
>
> diff --git a/drivers/net/wireless/libertas/if_sdio.c b/drivers/net/wireless/libertas/if_sdio.c
> index 55864c1..69d7fd3 100644
> --- a/drivers/net/wireless/libertas/if_sdio.c
> +++ b/drivers/net/wireless/libertas/if_sdio.c
> @@ -66,19 +66,19 @@ struct if_sdio_model {
> static struct if_sdio_model if_sdio_models[] = {
> {
> /* 8385 */
> - .model = 0x04,
> + .model = IF_SDIO_MODEL_8385,
> .helper = "sd8385_helper.bin",
> .firmware = "sd8385.bin",
> },
> {
> /* 8686 */
> - .model = 0x0B,
> + .model = IF_SDIO_MODEL_8686,
> .helper = "sd8686_helper.bin",
> .firmware = "sd8686.bin",
> },
> {
> /* 8688 */
> - .model = 0x10,
> + .model = IF_SDIO_MODEL_8688,
> .helper = "sd8688_helper.bin",
> .firmware = "sd8688.bin",
> },
> @@ -118,7 +118,7 @@ static u16 if_sdio_read_scratch(struct if_sdio_card *card, int *err)
> int ret, reg;
> u16 scratch;
>
> - if (card->model == 0x04)
> + if (card->model == IF_SDIO_MODEL_8385)
> reg = IF_SDIO_SCRATCH_OLD;
> else
> reg = IF_SDIO_SCRATCH;
> @@ -216,7 +216,7 @@ static int if_sdio_handle_event(struct if_sdio_card *card,
>
> lbs_deb_enter(LBS_DEB_SDIO);
>
> - if (card->model == 0x04) {
> + if (card->model == IF_SDIO_MODEL_8385) {
> event = sdio_readb(card->func, IF_SDIO_EVENT, &ret);
> if (ret)
> goto out;
> @@ -829,10 +829,10 @@ static int if_sdio_probe(struct sdio_func *func,
> if (sscanf(func->card->info[i],
> "ID: %x", &model) == 1)
> break;
> - if (!strcmp(func->card->info[i], "IBIS Wireless SDIO Card")) {
> - model = 4;
> - break;
> - }
> + if (!strcmp(func->card->info[i], "IBIS Wireless SDIO Card")) {
> + model = IF_SDIO_MODEL_8385;
> + break;
> + }
> }
>
> if (i == func->card->num_info) {
> diff --git a/drivers/net/wireless/libertas/if_sdio.h b/drivers/net/wireless/libertas/if_sdio.h
> index 37ada2c..cea343f 100644
> --- a/drivers/net/wireless/libertas/if_sdio.h
> +++ b/drivers/net/wireless/libertas/if_sdio.h
> @@ -12,6 +12,10 @@
> #ifndef _LBS_IF_SDIO_H
> #define _LBS_IF_SDIO_H
>
> +#define IF_SDIO_MODEL_8385 0x04
> +#define IF_SDIO_MODEL_8686 0x0b
> +#define IF_SDIO_MODEL_8688 0x10
> +
> #define IF_SDIO_IOPORT 0x00
>
> #define IF_SDIO_H_INT_MASK 0x04
More information about the libertas-dev
mailing list