SDIO probe: Error -84

[David Anders]

Simon,

are you loading the libertas driver as a module or compiled into a monolithic kernel?


dave


--- On Tue, 11/4/08, Simon Twogood <stwogood at siconix.com> wrote:

> From: Simon Twogood <stwogood at siconix.com>
> Subject: SDIO probe: Error -84
> To: libertas-dev at lists.infradead.org
> Date: Tuesday, November 4, 2008, 11:52 AM
> Hello all, when inserting my Wi2Wi, libertas 8686 based,
> SDIO card I  
> more often than not get the message:
> 
>    libertas_sdio: Libertas SDIO driver
>    libertas_sdio: Copyright Pierre Ossman
>    firmware: requesting sd8686_helper.bin
>    libertas: failed to load helper firmware
>    libertas_sdio: probe of mmc0:0001:1 failed with error
> -84
> 
> I'm using Linux 2.6.27.4 on an Atmel AT91SAM9263, and I
> have had  
> success with this card once or twice already, but this
> error comes up  
> almost always. I have not been able to determine what error
> -84 means,  
> can anyone tell me? I do have the binary firmware and
> helper inside  
> of /lib/firmware.
> 
> 
> Thanks,
> Simon
> 
> _______________________________________________
> libertas-dev mailing list
> libertas-dev at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/libertas-dev