8686 with SDIO on AT91SAM9263

[Hans-Jürgen Koch]

Am Fri, 25 Jan 2008 15:52:36 +0100
schrieb Eric BENARD <ebenard at free.fr>:

> Hi Marc,
> 
> Marc Pignat a écrit :
> > On Friday 25 January 2008, Hans-Jürgen Koch wrote:
> > ...
> >> thanks for your patches, I applied and tested them. Unfortunately,
> >> they don't change anything. But during my test I noticed an
> >> interesting
> > ...
> > Did you mean you still have 'mmc0: Timeout waiting end of packet'
> > messages? Try to remove the patch for packets not modulo 4 and
> > modify if_sdio to send only packets with size modulo 4. This is
> > what I do here, because the at91rm9200 just can't handle these
> > packets.
> > 
> > Hope this help, still searching for other ideas :-D
> > 
> On an AT91SAM9260 with a Marvell libertas 8686 on SlotB, I can
> confirm that your both patches correctly workaround the problem of
> the the Data Timeout Error.

Well, I don't see Data Timeout Messages anymore, but it keeps resetting
endlessly, and it still hangs in the same place.

> BTW, I'm using MMC_CAP_SDIO_IRQ and the SDIO IRQ and I patched
> libertas driver to pad blocks to a modulo 4 size.

In theory, this shouldn't be neccessary (TM) for the AT91SAM9263. But
I'd like to try it. Could you send me your patch so I don't have to
reinvent the wheel?

Thanks,
Hans