[PATCH] remove numprobes
Dan Williams
dcbw at redhat.com
Wed Nov 28 16:40:02 EST 2007
On Wed, 2007-11-28 at 17:29 +0100, Holger Schurig wrote:
> Remove the ability to specify number of probes via debugfs
>
> Signed-off-by: Holger Schurig <hs4233 at mail.mn-solutions.de>
Acked-by: Dan Williams <dcbw at redhat.com>
> Index: wireless-2.6/drivers/net/wireless/libertas/debugfs.c
> ===================================================================
> --- wireless-2.6.orig/drivers/net/wireless/libertas/debugfs.c 2007-11-28 18:11:47.000000000 +0100
> +++ wireless-2.6/drivers/net/wireless/libertas/debugfs.c 2007-11-28 18:12:02.000000000 +0100
> @@ -299,23 +299,6 @@ static int lbs_parse_dur(char *buf, size
> return val;
> }
>
> -static void lbs_parse_probes(char *buf, size_t count,
> - struct lbs_ioctl_user_scan_cfg *scan_cfg)
> -{
> - char *hold;
> - int val;
> -
> - hold = strstr(buf, "probes=");
> - if (!hold)
> - return;
> - hold += 7;
> - sscanf(hold, "%d", &val);
> -
> - scan_cfg->numprobes = val;
> -
> - return;
> -}
> -
> static void lbs_parse_type(char *buf, size_t count,
> struct lbs_ioctl_user_scan_cfg *scan_cfg)
> {
> @@ -367,7 +350,6 @@ static ssize_t lbs_setuserscan(struct fi
> scan_cfg->clear_bssid = lbs_parse_clear(buf, count, "clear_bssid=");
> lbs_parse_ssid(buf, count, scan_cfg);
> scan_cfg->clear_ssid = lbs_parse_clear(buf, count, "clear_ssid=");
> - lbs_parse_probes(buf, count, scan_cfg);
> lbs_parse_type(buf, count, scan_cfg);
>
> lbs_scan_networks(priv, scan_cfg, 1);
> Index: wireless-2.6/drivers/net/wireless/libertas/scan.h
> ===================================================================
> --- wireless-2.6.orig/drivers/net/wireless/libertas/scan.h 2007-11-28 18:12:16.000000000 +0100
> +++ wireless-2.6/drivers/net/wireless/libertas/scan.h 2007-11-28 18:12:23.000000000 +0100
> @@ -105,11 +105,6 @@ struct lbs_ioctl_user_scan_cfg {
> */
> u8 bsstype;
>
> - /**
> - * @brief Configure the number of probe requests for active chan scans
> - */
> - u8 numprobes;
> -
> /**
> * @brief BSSID filter sent in the firmware command to limit the results
> */
> Index: wireless-2.6/drivers/net/wireless/libertas/README
> ===================================================================
> --- wireless-2.6.orig/drivers/net/wireless/libertas/README 2007-11-28 18:14:13.000000000 +0100
> +++ wireless-2.6/drivers/net/wireless/libertas/README 2007-11-28 18:14:55.000000000 +0100
> @@ -201,15 +201,14 @@ setuserscan
> ssid="[SSID]" specify a SSID filter for the scan
> keep=[0 or 1] keep the previous scan results (1), discard (0)
> dur=[scan time] time to scan for each channel in milliseconds
> - probes=[#] number of probe requests to send on each chan
> type=[1,2,3] BSS type: 1 (Infra), 2(Adhoc), 3(Any)
>
> - Any combination of the above arguments can be supplied on the command line.
> - If the chan token is absent, a full channel scan will be completed by
> - the driver. If the dur or probes tokens are absent, the driver default
> - setting will be used. The bssid and ssid fields, if blank,
> - will produce an unfiltered scan. The type field will default to 3 (Any)
> - and the keep field will default to 0 (Discard).
> + Any combination of the above arguments can be supplied on the command
> + line. If the chan token is absent, a full channel scan will be
> + completed by the driver. If dur tokens are absent, the driver default
> + setting will be used. The bssid and ssid fields, if blank, will
> + produce an unfiltered scan. The type field will default to 3 (Any) and
> + the keep field will default to 0 (Discard).
>
> Examples:
> 1) Perform an active scan on channels 1, 6, and 11 in the 'g' band:
> @@ -230,10 +229,10 @@ setuserscan
> the current scan table intact, update existing or append new scan data:
> echo "bssid=00:50:43:20:12:82 keep=1" > setuserscan
>
> - 6) Scan channel 6, for all infrastructure networks, sending two probe
> - requests. Keep the previous scan table intact. Update any duplicate
> - BSSID/SSID matches with the new scan data:
> - echo "chan=6g type=1 probes=2 keep=1" > setuserscan
> + 6) Scan channel 6, for all infrastructure networks.
> + Keep the previous scan table intact. Update any duplicate BSSID/SSID
> + matches with the new scan data:
> + echo "chan=6g type=1 keep=1" > setuserscan
>
> All entries in the scan table (not just the new scan data when keep=1)
> will be displayed upon completion by use of the getscantable ioctl.
> Index: wireless-2.6/drivers/net/wireless/libertas/scan.c
> ===================================================================
> --- wireless-2.6.orig/drivers/net/wireless/libertas/scan.c 2007-11-28 18:13:06.000000000 +0100
> +++ wireless-2.6/drivers/net/wireless/libertas/scan.c 2007-11-28 18:13:48.000000000 +0100
> @@ -41,7 +41,6 @@
>
> //! Maximum memory needed for a lbs_scan_cmd_config with all TLVs at max
> #define MAX_SCAN_CFG_ALLOC (sizeof(struct lbs_scan_cmd_config) \
> - + sizeof(struct mrvlietypes_numprobes) \
> + CHAN_TLV_MAX_SIZE \
> + SSID_TLV_MAX_SIZE)
>
> @@ -384,7 +383,6 @@ void lbs_scan_worker(struct work_struct
> * - channel list
> *
> * If the SSID or BSSID filter is not present, disable/clear the filter.
> - * If the number of probes is not set, use the adapter default setting
> * Qualify the channel
> *
> * @param priv A pointer to struct lbs_private structure
> @@ -414,11 +412,9 @@ lbs_scan_setup_scan_config(struct lbs_pr
> u8 * pfilteredscan,
> u8 * pscancurrentonly)
> {
> - struct mrvlietypes_numprobes *pnumprobestlv;
> struct mrvlietypes_ssidparamset *pssidtlv;
> struct lbs_scan_cmd_config *pscancfgout = NULL;
> u8 *ptlvpos;
> - u16 numprobes;
> int chanidx;
> int scantype;
> int scandur;
> @@ -467,9 +463,6 @@ lbs_scan_setup_scan_config(struct lbs_pr
> pscancfgout->bsstype =
> puserscanin->bsstype ? puserscanin->bsstype : CMD_BSS_TYPE_ANY;
>
> - /* Set the number of probes to send, use adapter setting if unset */
> - numprobes = puserscanin->numprobes ? puserscanin->numprobes : 0;
> -
> /*
> * Set the BSSID filter to the incoming configuration,
> * if non-zero. If not set, it will remain disabled (all zeros).
> @@ -501,22 +494,11 @@ lbs_scan_setup_scan_config(struct lbs_pr
> }
> } else {
> pscancfgout->bsstype = CMD_BSS_TYPE_ANY;
> - numprobes = 0;
> - }
> -
> - /* If the input config or adapter has the number of Probes set, add tlv */
> - if (numprobes) {
> - pnumprobestlv = (struct mrvlietypes_numprobes *) ptlvpos;
> - pnumprobestlv->header.type = cpu_to_le16(TLV_TYPE_NUMPROBES);
> - pnumprobestlv->header.len = cpu_to_le16(2);
> - pnumprobestlv->numprobes = cpu_to_le16(numprobes);
> -
> - ptlvpos += sizeof(*pnumprobestlv);
> }
>
> /*
> * Set the output for the channel TLV to the address in the tlv buffer
> - * past any TLVs that were added in this fuction (SSID, numprobes).
> + * past any TLVs that were added in this fuction (SSID).
> * channel TLVs will be added past this for each scan command, preserving
> * the TLVs that were previously added.
> */
More information about the libertas-dev
mailing list